Datos del accidente

The objectives of the EMP are to:

• Identify a range of mitigation measures which can reduce and mitigate the potential impacts to minimal or insignificant levels

• To identify measures that can optimize beneficial impacts

• To create management structure that addresses the concerns and complaints with regards to the environmental protection, conservation & improvement and pollution

• To establish a method of monitoring and auditing environmental management practices during all phases of project

• Ensure that the construction and operational phases of the project continues within the principles of Integrated Environmental Management.

• Outline specific actions considered necessary to assist in mitigating the environmental impact of the project.

• Propose mechanisms for monitoring compliance with the EMP and reporting thereon. • Specify time periods within which the measures contemplated in the environmental

management plan must be implemented, where appropriate.

• To comply with all the condition of Approved TOR/regulations / applicable laws stipulated by MoEF or Central / State Pollution Control Boards.

• To control and remediate wastewater, emission & solid waste posing adverse impacts on environment using /installing appropriate pollution control technology & equipment.

• Ensure that the hazard prevention &safety recommendations are complied with and to improve workplace conditions for employees by reducing every kind of pollution and improving workplace environment/atmosphere.

• To make budgetary provision and allocation of funds for environment management system and to timely revision of budgetary provisions.

• To contribute significantly for sustainable development by resource conservation, waste minimization/recycling/reuse and approaching to Cleaner Production practices.

• To encourage support and conduct developmental works for the purpose of achieving environment standards and to improve methods of environment management.

By, UniStar Environment & Research Labs Pvt. Ltd. Proposed Synthetic Organic Chemical Manufacturing Unit 6 • To encourage local people for the purpose of improvement environment health and to

improve their conditions through CSR Activities. 2. ENVIRONMENT MANAGEMENT CELL

The company has already formulated the environment management cell. With vision to improve the efficiency of existing EMC and to operate the additional/modified EMP requirements as suggested in the present chapter, Environmental Management Cell has been modified for efficient & easy operation of environment management system & operations that of. The illustrative presentation of the EMC is presented below in Figure 1.

As indicated in above organogram, MD of the company will lead the EMS as head of the Environmental Management Cell. MD will be assisted by GM for day to day activities of EMC. GM will guide the subordinate staff members- Environment Manager, Medical Officer & PRO/ Welfare officer for necessary action plan & activities of environmental management plan. PRO will look after the operation related with government offices, public and other stakeholders for necessary operation including statutory proceedings. The technical operations including environmental monitoring and efficient operations & maintenance of pollution control equipment/machineries etc. The Lab in-charge will look after the operations of in-house

monitoring & analysis of environmental samples. Approved environmental

laboratory/consultant will also be appointed for the operations related with third party environmental monitoring, environmental audit (as & when required) and other techno-legal environmental services. The plant & shift incharge will look after the plant / department level operations including ETP operation, APCD Operation, Process and Utility operations to ensure that all instructions & action plans issued by superior authorities are efficiently followed & implemented to prevent environmental pollution & operational hazards. Primarily the Environment manager will be responsible for all technical non-conformities of EMS and he/she is responsible to prepare necessary documents & report for day to day compliance to stipulated EMS, CC&A Conditions as well as other statutory & voluntary requirements.

All necessary standard operating procedures for technical matters of EMS will be prepared by Environment Manager whereas the standard operating procedures administrative operation will be prepared by PRO. The standard operating procedures will be prepared well before the inception of operation phase of the project and the GM will check these SOPs. After necessary corrections, GM will forward these SOP to MD for approval and approved SOP will be controlled by responsible personnel. The approved copy of these SOP will be issued to concern personnel for day to day operations.

By, UniStar Environment & Research Labs Pvt. Ltd. Proposed Synthetic Organic Chemical Manufacturing Unit 7 Up on citation of any non-conformities/non-compliance in EMS and related operations, he/she will immediately report to the GM with necessary report/document. The GM then will call up a meeting on urgent basis and will issue an action plan to close the non-compliance/non- conformity. If the issue of non-conformities/non-compliance is cited to be serious or major GM will consult MD of the company and according to the instruction of MD further action plan will be issued by GM to all members of EMC. The environment manager by help of other personnel of EMC and company will start operation to resolve the issue of non-conformities/non- compliance and he/she will regularly update the GM for the current status. Similarly GM will give instruction to PRO for necessary actions required to be initiated at administrative level including necessary proceeding with other organization, govt. offices & public etc. All official declaration about the non-conformities will be made by MD. Such declaration can also be made by GM after authorization by MD. Whenever required information or report of non- conformities will be submitted or issued to govt. offices or public by PRO in line with the necessary instructions given by GM.

Figure 1: Environment Management Cell