Specifications
Model Cisco ASR 9006 Cisco ASR 9010 Cisco ASR 9922 Dimensions Height—17.5 in. (444.5 mm)
Width—17.5 in. (444.5 mm) Depth:
• With doors—31.45 in. (798.8 mm) • Without doors—28.65 in (727.2 mm) Weight: • 110 lbs (50 kg) (Unloaded) • 230 lbs (106.8 kg) (Fully Loaded) Height—36.75 in. (933.5 mm) Width—17.5 in. (444.5 mm) Depth:
• With doors—31.45 in. (798.8 mm) • Without doors—28.65 in (727.2 mm) Weight: • 191 lbs (86.8 kg) (Unloaded) • 375 lb (170.5 kg) (maximum)
Height: 77 in. (44 RU chassis) Width: 17.75 in.
Depth:
• With doors: 31.45 in. (798.8 mm)
• Without doors: 28.65 in. (727.2 mm)
Weight: • 420 lbs (unloaded) • 800 lbs (maximum)
Slot Orientation Horizontal Vertical Vertical
Cisco ASR 9000 Series RSP Same as Cisco ASR 9010 Dual redundant RSPs in 2 slots
Dual redundant RPs in 2 slots RSPs segregated into RP and FC
Cisco ASR 9000 Series LCs Four line card slots Eight line card slots 20 line card slots
“Commons” Components Two RSPs Two fan trays
One PEM (either DC or AC) One fan filter
Two RSPs Two fan trays
Two PEMs (either DC or AC) One fan filter
2 RPs 7 FCs 4 fan trays
4 DC PEMs or 4 AC PEMs 1 fan filter
Reliability and Availability Same as Cisco ASR 9010 Fabric redundancy Fan redundancy Feed redundancy Power-supply redundancy RSP redundancy Software redundancy Fabric redundancy Fan redundancy Feed redundancy Power-supply redundancy RSP redundancy Software redundancy
Rack Mounting Same as Cisco ASR 9010 Note: Minimum 17.75-in. opening between posts is needed for proper operation.
Yes • 19-inch
• 21 and 23 inch adapters available
Yes • 19-inch
• 21 and 23 inch adapters available
Airflow Side-to-back Front-to-back Front-to-back
Chassis Switching Up to 3.2 Tbps Up to 6.4 Tbps Up to 48Tbps
Capacity
Fabric Same as Cisco ASR 9010 One per RSP
• Active/Active non-blocking operation mode in dual RSP redundant configuration. • Fully redundant in dual RSP
redundant configuration • Built-in service-intelligence and traffic-prioritization capability 7 fabric cards • Supports 6+1 redundancy • Operate in Active/Active nonblocking mode • Built-in service-intelligence and traffic-prioritization capability
Thermal Two fan trays
• Six high-efficiency fans per tray
• Variable-speed fans for optimal thermal performance • No single point of failure
Two fan trays
• Twelve high-efficiency fans per tray
• Variable-speed fans for optimal thermal performance • No single point of failure
4 fan trays
• 12 high-efficiency fans per tray
• Variable-speed fans for optimal thermal performance • No single point of failure
Power
Modularity • Up to 3 power modules (AC or DC) for future scalability Multiple power module types • Same as Cisco ASR 9010 Note: Mixing of AC and DC modules is not supported. DC modules can be mixed and matched.
• Up to 6 power modules (AC or DC) for future scalability Multiple power module types • 3-kW AC power module • 2.1 and 1.5-kW DC power
modules
Note: Mixing of AC and DC modules is not supported. DC modules can be mixed and matched.
• Up to 16 power modules (AC or DC) for future scalability Multiple power module types • 3-kW AC power module • 2.1-kW DC power modules Note: Mixing of AC and DC modules is not supported. DC modules can be mixed and matched.
Redundancy • Module redundancy: 1:N-1:1 • Feed redundancy • Module redundancy: 1:N-1:1 • Feed redundancy • PEM redundancy • Module redundancy: 1:N-1:1 • Feed redundancy • PEM Redundancy Online model comparison chart: http://www.cisco.com/en/US/products/ps9853/prod_models_comparison.html
Ro
u
ti
n
g
Selected Part Numbers and Ordering Information
For More Information
http://www.cisco.com/go/asr9000
The Cisco ASR 1000 Series Aggregation Services Routers include five versions: the Cisco ASR 1001 Router, the Cisco ASR 1002 Router, the Cisco ASR 1004 Router, the Cisco ASR 1006 Router, and the Cisco ASR1013 Router. All five models use the new, innovative, and powerful Cisco QuantumFlow Processor and are optimized for both service provider, managed services and enterprise deployments.
For service provider deployments, the Cisco ASR 1000 Series is designed for broadband, SP edge, and route reflector. For enterprise deployments, the Cisco ASR 1000 Series is applicable for WAN aggregation, Internet edge, data center interconnect, and ultra-high-end branch.
The Cisco ASR 1000 Series delivers routing with multiple services embedded in the Cisco QuantumFlow Processor at wire speeds of up to 40 Gbps. The supported services include security services (IPsec encryption, firewall, and router security), Performance Routing, quality of service (QoS), multicast, Application Visibility and Control (AVC), broadband aggregation, and Cisco Unified Border Element (also known as session border controller), among others.
With the separation of the control and data planes in the Cisco ASR 1000 Series Router architecture, it enables software redundancy (on the Cisco ASR 1001, 1002, and 1004 Routers), hardware redundancy (on the Cisco ASR 1006 and ASR 1013 Routers), and distributed denial service of attack (DDoS) protection for all the models. Additionally, the modular Cisco IOS XE Software that is introduced with the Cisco ASR 1000 Series facilitates In Service Software Upgrade (ISSU) on the ASR 1006 and ASR 1013. I/O connectivity is provided through shared port adapters (SPAs), which are housed in the SPA Interface Processor (SIP) card.
From a price-to-performance perspective, the Cisco ASR 1000 Series Router solution fits well between the Cisco 7200 and Cisco 7301 Series and the Cisco 7600 and Cisco Catalyst 6500 Series Switches, thus providing a comprehensive high-end and midrange routing portfolio.
All the following Cisco ASR 1000 Series Aggregation Services Routers offer L3VPN, route reflector, WAN services aggregation, managed customer premises equipment (CPE), and Layer 2 Tunneling Protocol access concentrator (LAC) or Layer 2 Tunneling Protocol network server (LNS).
Ideal for Companies That Need These Features
Cisco ASR 9000 Series Chassis
ASR-9006-AC/ASR-9010-DC Cisco ASR 9006 chassis ASR-9010-AC/ASR-9010-DC Cisco ASR 9010 chassis ASR-9922-AC/ASR-9922-DC Cisco ASR 9922 chassis
A9K-2X100GE-SE Cisco ASR 9000 2-Port 100GE Service Edge Optimized Line Card A9K-2X100GE-TR Cisco ASR 9000 2-Port 100GE Transport Optimized Line Card A9K-24X10GE-SE Cisco ASR 9000 24-Port 10GE Service Edge Optimized Line Card A9K-24X10GE-TR Cisco ASR 9000 24-Port 10GE Transport Optimized Line Card A9K-ISM-100 Cisco ASR 9000 Integrated Services Module