EFECTOS Y FACTORES DEL ENVEJECIMIENTO
III.3 Principales actividades a desarrollar
Loading Your Files
1. Go to Start>Programs>Bentley>InRoads Group XM load the product “Bentley Rail Track”
2. From
rail_tutorial.dgn
3. Inside Bentley Rail Track, select File > Open.
4. Browse to open the files “
5. Click the Preferences tab at the bottom of the Explorer.
6. Click the plus sign (+) next to Preferences. The railm_tut.xin
7. To the right you should see three co Type, and Access Mode.
Setting Up Bentley Rail Track 91
Setting Up Bentley Rail Track
Bentley Rail Track provides a complete set of tools for simple track layout and comprehensive railway design. Typically, a rail workflow begins with loading project files and setting working preferences.
Before Getting Started
Locate the tutorial data in C:\Program
\Bentley\Tutorials\ Rail. Extract RailChapter5.exe Loading Your Files
Go to Start>Programs>Bentley>InRoads Group XM load the product “Bentley Rail Track”
From C:\Program Files\Bentley\Tutorials\Rail rail_tutorial.dgn or rail_tutorial.dwg file.
Inside Bentley Rail Track, select File > Open.
Browse to C:\Program Files\Bentley\Tutorials\
open the files “railm_tut.xin” and “existing.dtm”.
Click the Preferences tab at the bottom of the Explorer.
Click the plus sign (+) next to Preferences. The railm_tut.xin file has been loaded.
To the right you should see three columns: File Name, Type, and Access Mode.
Setting Up Bentley Rail Track
Setting Up Bentley Rail
Bentley Rail Track provides a complete set of tools for simple track layout and comprehensive railway design. Typically, a
low begins with loading project files and setting
RailChapter5.exe.
Go to Start>Programs>Bentley>InRoads Group XM and Rail open the
\Rail and
”.
Click the Preferences tab at the bottom of the Explorer.
Click the plus sign (+) next to Preferences. The lumns: File Name,
The preference file sets units of measure (imperial or metric) and the settings and layers on which everything in the design, except the geometry, displays.
stores all Style and Symbology information that determines how the surface features, horizontal alignment, coordinate geometry points, and closed figures are displayed.
Next
Setting Units of Measure
Bentley Rail Track uses the units of measure selected during installation, either imperial or metric. This setting is saved in the civil.xin
Explorer when you click Preferences. Bentley Rail Track starts each session using this
For this task, you will use metric units in a file prepared for this tutorial:
following:
1. Click Tools > Options.
2. Click the Units and Formats tab. Under Units, for Linear, select Metric. For Angular, select Degrees. Click Apply.
3. Click the Geometry tab.
The preference file sets units of measure (imperial or metric) and the settings and layers on which everything in the design, except the geometry, displays. This file also stores all Style and Symbology information that determines how the surface features, horizontal alignment, coordinate geometry points, and closed figures are displayed.
Next, modify the preferences file.
Setting Units of Measure
Bentley Rail Track uses the units of measure selected during installation, either imperial or metric. This setting is saved in
civil.xin file. The location of the civil.xin is shown in the Explorer when you click Preferences. Bentley Rail Track starts each session using this civil.xin file.
For this task, you will use metric units in a file prepared for this tutorial: railm_tut.xin. To define settings, do the following:
Click Tools > Options.
Click the Units and Formats tab. Under Units, for Linear, select Metric. For Angular, select Degrees. Click Apply.
Click the Geometry tab.
The preference file sets units of measure (imperial or metric) and the settings and layers on which everything in
This file also stores all Style and Symbology information that determines how the surface features, horizontal alignment, coordinate geometry points, and closed figures are displayed.
Bentley Rail Track uses the units of measure selected during installation, either imperial or metric. This setting is saved in
is shown in the Explorer when you click Preferences. Bentley Rail Track starts For this task, you will use metric units in a file prepared for
settings, do the
Click the Units and Formats tab. Under Units, for Linear, select Metric. For Angular, select Degrees. Click Apply.
4. Under Curve Definition, for Horizontal, select Chord. For Vert
5. Click Apply; then click the Preferences button.
6. Click Save.
This updates the settings in the file. When the Save button is selected, the .
you start Bentley R
7. Click Close to dismiss the Preferences dialog box.
8. You’ve just modified the
9. Click Close to dismiss the Options dialog box.
Using Pencil/Pen Lock The Pencil/Pen lock lets you
permanently (ink) write to the graphics file. This concept is similar to drawing on paper. Using a pencil, you have the ability to quickly erase a drawing to remove it. In contrast, graphics drawn in ink are of a permanent form a
deleted to be removed. The Delete Ink Lock command is used to remove graphics drawn in ink. These features are helpful when you want to display several iterations of a graphic until the desired graphic is displayed. Then, after comparing the objects, you can remove those not desired.
1. Go to Surface > View Surface > Perimeter. Make sure surface
2. Click Edit. On MicroStation, for Line Style, select 0. On AutoCAD, for Line Type, select a continuous line.
3. Click Ok.
4. Click Apply
The perimeter is drawn on the screen.
Setting Up Bentley Rail Track
Under Curve Definition, for Horizontal, select Chord. For Vertical, select Parabolic. For Measure, select Along Chord.
Click Apply; then click the Preferences button.
Click Save.
This updates the settings in the file. When the Save button is selected, the .xin file is updated so that next time you start Bentley Rail Track the settings are the same.
Click Close to dismiss the Preferences dialog box.
You’ve just modified the railm_tut.xin file.
Click Close to dismiss the Options dialog box.
Using Pencil/Pen Lock
The Pencil/Pen lock lets you temporarily (pencil) or
permanently (ink) write to the graphics file. This concept is similar to drawing on paper. Using a pencil, you have the ability to quickly erase a drawing to remove it. In contrast, graphics drawn in ink are of a permanent form and must be deleted to be removed. The Delete Ink Lock command is used to remove graphics drawn in ink. These features are helpful when you want to display several iterations of a graphic until the desired graphic is displayed. Then, after comparing the objects, you can remove those not desired.
Go to Surface > View Surface > Perimeter. Make sure surface existing is selected.
Click Edit. On MicroStation, for Line Style, select 0. On AutoCAD, for Line Type, select a continuous line.
Click Ok.
Click Apply.
The perimeter is drawn on the screen.
Track 93 Under Curve Definition, for Horizontal, select Chord. For
ical, select Parabolic. For Measure, select Along Chord.
This updates the settings in the file. When the Save file is updated so that next time ail Track the settings are the same.
Click Close to dismiss the Preferences dialog box.
temporarily (pencil) or
permanently (ink) write to the graphics file. This concept is similar to drawing on paper. Using a pencil, you have the ability to quickly erase a drawing to remove it. In contrast,
nd must be deleted to be removed. The Delete Ink Lock command is used to remove graphics drawn in ink. These features are helpful when you want to display several iterations of a graphic until the desired graphic is displayed. Then, after comparing the
Go to Surface > View Surface > Perimeter. Make sure Click Edit. On MicroStation, for Line Style, select 0. On AutoCAD, for Line Type, select a continuous line.
5. Make sure that you are in Pencil mode.
This command is Either/Or meaning you are either in pencil mode or ink mode.
6. Using your CAD software, move the perimeter.
7. Click Surface >View Surface >Perimeter.
8. Click Ed
9. For Color, click the color palette and select a different color.
10. Click OK.
11. Click Apply, then click Close.
The first perimeter was erased and the second (current) perimeter was displayed. The perimeter is written to the design file because Write lock i
Note
Click the General tab. Ensure the Omit Automatic
Graphics Refresh option is turned off. When this option is on, graphic display is not refreshed: all graphics remain displayed.
12. Toggle to Pen mode.
13. Click Surface > View Surface > Perimeter.
14. Cli
15. For Color, click on the color palette and select a color.
Make sure that you are in Pencil mode.
This command is Either/Or meaning you are either in pencil mode or ink mode.
Using your CAD software, move the perimeter.
Click Surface >View Surface >Perimeter.
Click Edit.
For Color, click the color palette and select a different color.
Click OK.
Click Apply, then click Close.
The first perimeter was erased and the second (current) perimeter was displayed. The perimeter is written to the design file because Write lock is toggled to Pencil mode.
Note If the graphic is not erased, click Tools > Options.
Click the General tab. Ensure the Omit Automatic
Graphics Refresh option is turned off. When this option is on, graphic display is not refreshed: all graphics remain displayed.
Toggle to Pen mode.
Click Surface > View Surface > Perimeter.
Click Edit.
For Color, click on the color palette and select a color.
This command is Either/Or meaning you are either in
For Color, click the color palette and select a different color.
The first perimeter was erased and the second (current) perimeter was displayed. The perimeter is written to the
s toggled to Pencil mode.
Options.
Click the General tab. Ensure the Omit Automatic
Graphics Refresh option is turned off. When this option is on, graphic display is not refreshed: all graphics remain
For Color, click on the color palette and select a color.
Setting Up Bentley Rail Track 95 16. Click OK.
17. Click Apply.
The previous graphic, written in pencil, is erased. The current perimeter is drawn in the graphics file in ink.
18. Using your CAD software, move the perimeter.
19. In the View Perimeter dialog box, click Apply again.
The second perimeter is displayed. The first graphic remains because it was written to the graphics file in ink.
20. Using your CAD software, move the second perimeter.
21. Toggle to Pencil Mode.
22. In the View Perimeter dialog box, click Edit.
23. On MicroStation, for Line Style, select 2. On AutoCAD, for Line Type, select a dashed type.
24. On MicroStation, for Weight, select 1.
25. Click OK.
26. Click Apply.
The third perimeter is drawn in pencil. It has a different line style.
27. Click Close to dismiss the View Perimeter dialog box.
Pen mode allows you to display several versions of a graphic; Pencil mode only allows you to display one.
28. Turn on Delete Ink Lock.
29. Click Surface >View Surface >Perimeter.
30. Click Edit.
31. For Color, click
32. On MicroStation, for Line Style, select 0. On AutoCAD, for Line Type, select Continuous.
33. On MicroStation, for Weight, select 1.
34. Click OK.
35. Click Apply.
The two perimeters written in ink are deleted because Delete Ink L
removed because Pencil mode only retains the most recent graphic. The current (last) graphic is displayed.
ick Close to dismiss the View Perimeter dialog box.
Pen mode allows you to display several versions of a graphic; Pencil mode only allows you to display one.
Turn on Delete Ink Lock.
Click Surface >View Surface >Perimeter.
Click Edit.
For Color, click the color palette and select a color.
On MicroStation, for Line Style, select 0. On AutoCAD, for Line Type, select Continuous.
On MicroStation, for Weight, select 1.
Click OK.
Click Apply.
The two perimeters written in ink are deleted because Delete Ink Lock is on. The perimeter written in pencil is removed because Pencil mode only retains the most recent graphic. The current (last) graphic is displayed.
ick Close to dismiss the View Perimeter dialog box.
Pen mode allows you to display several versions of a graphic; Pencil mode only allows you to display one.
the color palette and select a color.
On MicroStation, for Line Style, select 0. On AutoCAD, for
The two perimeters written in ink are deleted because ock is on. The perimeter written in pencil is removed because Pencil mode only retains the most recent graphic. The current (last) graphic is displayed.
Setting Up Bentley Rail Track 97 36. Click Close to dismiss the View Perimeter dialog box.
37. Turn off Delete Ink lock.
38. Update the view.
39. From the CAD menu, save rail_tutorial.dgn or rail_tutorial.dwg.
40. Click File > Exit and then exit your CAD software, or continue to Chapter 2, Creating a Geometry Project.
5
Overview
Bentley Rail Track stores coordinate geometry information in a geometry project
tutorial, you will define horizontal and vertical alignments.
This information is stored in the geometry project. You can save as
geometry project.
This chapter describes several processes related to the
geometry project: importing coordinate geometry and creating horizontal and vertical alignments. You create a geometry