QUE EN CASO DE HACER EFECTIVA LA PRESENTE POLIZA, __(NOMBRE DE LA AFIANZADORA) ACEPTA EXPRESAMENTE LO PERPETUADO EN LOS ARTICULO S279, 2080 Y 178 DE LA LEY DE INSTITUCIONES DE SEGUROS Y FIANZAS

En-2

Details on AM/FM reception

Tuning into a Radio Station

z

„Tuning automatically

1. Press TUN on the main unit several times to select either "AM" or "FM".

2. Press TUNING MODE so that the "AUTO" indicator on the display lights.

3. Press TUNING to start automatic tuning.

● Searching automatically stops when a station is

found. When tuned into a radio station, the " TUNED " indicator on the display lights. When tuned into an FM radio station, the "FM STEREO" indicator lights.

● No sound is output while the " TUNED " indicator

is off.

When the signal from an FM radio station is weak:

Radio wave may be weak depending on the building structure and environmental conditions. In that case, perform the manual tuning procedure as explained in the next section, "Tuning manually", to manually select the desired station.

z

„Tuning manually

1. Press TUN on the main unit several times to select either "AM" or "FM".

2. Press TUNING MODE so that the "AUTO" indicator on the display goes off.

3. Press TUNING to select the desired radio station.

● The frequency changes by 1 step each time

you press the button. The frequency changes continuously if the button is held down and stops when the button is released. Tune by looking at the display.

To return to automatic tuning: Press TUNING MODE

on the main unit again. The unit automatically tunes into a radio station. Normally "AUTO" should be displayed.

z

„_{Tuning to the frequency directly}

It allows you to directly enter the frequency of the radio station you want to listen to.

1. Press TUNER on the remote controller several times to select either "AM" or "FM".

2. Press D.TUN.

3. Using the number buttons, enter the frequency of the radio station within 8 seconds.

● To enter 87.5 (FM), for example, press 8, 7, 5, or

8, 7, 5, 0. If you entered the wrong number, press D.TUN and enter the correct one.

Details on AM/FM reception

En-3

Presetting an AM/FM Radio Station

It allows you to register up to 40 of your favorite AM/FM radio stations. Registering radio stations in advance allows you to tune into your radio station of choice directly.

z

„_{Registration Procedure}

1. Tune into the AM/FM radio station you want to register. 2. Press MEMORY on the unit so that the preset number

on the display flashes.

3. Press PRESET several times to select a number between 1 and 40 while the preset number is flashing (about 8 seconds).

4. Press MEMORY again to register the station.

● When the station is registered, the preset number

stops flashing.

● Repeat this procedure for all of your favorite AM/FM

radio stations.

z

„_{Selecting a Preset Radio Station}

1. Press CH +/- on the remote controller to select a preset number.

● Alternatively you can press PRESET on the main unit. You can also select by directly entering the preset number with the number buttons on the remote controller.

z

„Deleting a Preset Radio Station

1. Press CH +/- on the remote controller to select the preset number to delete.

2. Press and hold MEMORY on the main unit and press TUNING MODE to delete the preset number.

● When deleted, the number on the display goes off.

Using RDS (European, Australian and Asian models)

RDS stands for Radio Data System and is a method of transmitting data in FM radio signals.

● RDS works only in areas where RDS broadcasts are

available.

● In some cases, the text information appeared on the

display is not identical to the content transmitted by the RDS station. Furthermore, unexpected characters may be displayed when the unit receives unsupported characters. However, this is not a malfunction.

● If the signal from an RDS station is weak, the RDS data

may be displayed continuously or not at all.

PS (Program Service): Tuning into a radio station

distributing Program Service information displays the radio station name. Pressing DISPLAY displays the frequency for 3 seconds.

RT (Radio Text): Tuning into a radio station transmitting

Radio Text information displays text on the display of the unit.

PTY (Program Type): Allows you to search for RDS

stations by program type.

TP (Traffic Program): Allows you to search for radio

stations transmitting traffic information.

z

„_{Displaying Radio Text (RT)}

1. Press RT/PTY/TP on the main unit once.

● The Radio Text (RT) is displayed scrolling across

the display. "No Text Data" is displayed when no text information is available.

z

„_{Searching by Type (PTY)}

1. Press RT/PTY/TP on the main unit twice.

Details on AM/FM reception

En-4

2. Press PRESET to select the type of program to search for.

● The following RDS station types are displayed:

None

News (News reports) Affairs (Current affairs) Info (Information) Sport

Educate (Education) Drama

Culture

Science (Science and technology) Varied

Pop M (Pop music) Rock M (Rock music)

Easy M (Middle of the road music) Light M (Light classics)

Classics (Serious classics) Other M (Other music) Weather

Finance

Children (Children's programmes) Social (Social affairs)

Religion Phone In Travel Leisure

Jazz (Jazz music) Country (Country music) Nation M (National music) Oldies (Oldies music) Folk M (Folk music) Document (Documentary)

3. Press ENTER to search the radio stations of the selected type.

4. When such a radio station is found, the indication on the display flashes. Then, press ENTER again.

● If no stations are found, the message "Not Found" is

displayed.

z

„_{Listening to Traffic Information (TP)}

1. Press RT/PTY/TP on the main unit three times.

● "[TP]" will be displayed if traffic information is

transmitted by the radio station you are tuned in. "TP" only is displayed if no traffic information is available.

2. Press ENTER to search a radio station distributing traffic information.

3. When a radio station is found, searching stops and traffic information is received.

● "Not Found" is displayed if no radio station