Red de extinción de incendios: tubería, valvulería y accesorios

Blocking and Admitting (Blacklists and Whitelists)

The following points apply for all lists described below: - Global or user-related:

The settings for the black and Whitelists in the administrator console apply globally, meaning for all users. If there are applicable black/white list entries for the user as well, these take precedence over the global settings. Therefore it may be that a global block is on REJECT, but the user has set the block to MARK. Fact is: The user always wins! The following applies for all blacklists: The action selected for a block applies. The setting in the filter profile itself is of no relevance.

- Validity date:

Make sure to select a valid date in the future, otherwise the entry will not apply. At present, there are no progress reports. The default date is TODAY + 365 days.

- Large/Small Caps:

E-mail addresses, domain names and subject lines are not case sensitive. - Umlauts:

Creating a new DWL Domain White list

You can create new Domain Whitelists via the filter lists.

Requirement: None.

1. In the tree view, select Blocking and admitting - DWL domain white list. 2. Right-click in the list view.

3. In the selection list, choose the entry New. The following fields are displayed:

Illustration: Blocking and admitting - DWL domain white list

4. Enter a Domain.

5. State the validity period of the filter.

Click on the calendar page if you need a calendar for the date selection. 6. If required, enter a comment to this filter.

7. Click on OK to save the configuration and exit. CANCEL: Reject changes and exit the configuration.

Creating a new DBL Domain Blacklist

You can create new Domain Blacklists via the filter lists.

Requirement: None.

1. In the tree view, select Blocking and admitting - DBL domain blacklist. 2. Right-click in the list view.

3. In the selection list, choose the entry New. The following fields are displayed:

Illustration: Blocking and admitting - DBL domain blacklist

4. Enter a Domain.

5. State the validity period of the filter.

Click on the calendar page if you need a calendar for the date selection. 6. Select the action for the filter via the selection list.

The possible settings are mark, quarantine and reject. 7. If required, enter a comment to this filter.

8. Click on OK to save the configuration and exit. CANCEL: Reject changes and exit the configuration.

Creating a new AWL Address White list

You can create new Address Whitelists via the filter lists.

Requirement: None.

1. In the tree view, select Blocking and admitting - AWL address white list. 2. Right-click in the list view.

3. In the selection list, choose the entry New. The following fields are displayed:

6. If required, enter a comment to this filter. 7. Click on OK to save the configuration and exit.

CANCEL: Reject changes and exit the configuration.

Importing AWL Address White list

Serves to import e-mail addresses to the address white list:

1. In the tree view, select Block and Accept - AWL address white list. 2. Right-click in the list view.

3. In the selection list, choose the entry Import addresses. The following fields are displayed:

Illustration: Blocking and admitting - AWL address import

14.Select "Read addresses from file".

15.Select the file to be imported in the dialog field - File selection.

Format: one e-mail address per line. The address must be valid (@ sign). The line must be terminated with a CR line feed, also the last line. Invalid addresses, e.g. comments, are skipped.

16.Select in the menu „Import - Save addresses". Now the addresses are imported to the white list. You receive a control message stating how many addresses were imported.

Creating a new ABL Address Blacklist

You can create new address blacklists via the filter lists.

Requirement: None.

10.In the tree view, select Blocking and admitting - ABL address blacklist. 11.Right-click in the list view.

12.In the selection list, choose the entry New. The following fields are displayed:

Illustration: Blocking and admitting - ABL address blacklist

13.Enter the desired e-mail address. 14.State the validity period of the filter.

Click on the calendar page if you need a calendar for the date selection. 15.Select the action for the filter via the selection list.

The possible settings are mark, quarantine and reject. 16.If required, enter a comment to this filter.

17.Click on OK to save the configuration and exit. CANCEL: Reject changes and exit the configuration.

Create a new SWL Subject White list

You can create new Subject Whitelists via the filter lists.

Requirement: None.

Illustration: Blocking and admitting - SWL subject white list

4. Enter a character string.

5. State the validity period of the filter. The default is: Today + 365 days.

Click on the selection list Valid until if you require a calendar for selecting the date. 6. If required, enter a comment to this filter.

7. Click on OK to save the configuration and exit. CANCEL: Reject changes and exit the configuration.

Creating a new SBL Subject Blacklist

You can create new Subject Blacklists via the filter lists.

Requirement: None.

1. In the tree view, select Blocking and admitting - SBL subject blacklist. 2. Right-click in the list view.

3. In the selection list, choose the entry New. The following fields are displayed:

Illustration: Blocking and admitting - SBL subject blacklist

6. Select the action for the filter via the selection list. The possible settings are mark, quarantine and reject. 7. If required, enter a comment to this filter.

8. Click on OK to save the configuration and exit. CANCEL: Reject changes and exit the configuration.

Edit Filters

Proceed as follows to edit an existing filter.

Requirements: Filter is available in the list view.

1. In the tree view at Block and admit, select the respective filter list. 2. Double-click on the filter to be edited.

The configuration window opens. 3. Make the desired changes.

4. Click on OK to save the configuration and exit. CANCEL: Reject changes and exit the configuration.

Delete Filter

Proceed as follows to delete an existing filter.

Requirements: Filter is available in the list view.

1. In the tree view at Block and Accept, select the respective filter list. 2. Right-click on the filter to be deleted.

3. In the selection list, choose the entry Delete.

4. Confirm the prompting message with YES to delete the Internet domain. No: Realm is not deleted.

4.5 REDDOXX MailDepot

The Reddoxx MailDepot was removed from this chapter. You will find the new MailDepot 2.0 (starting with appliance version 2027) inside the chapter 5

4.6 REDDOXX MailSealer

Overview

With the MailSealer you can sign and encrypt emails for sending. Here you can chose between two different methods divided into 2 product groups.

The MailSealer Light encrypts on the basis of a passphrase (symmetric). The MailSealer encrypts and signs according to S/MIME or PGP (PGP is not yet supported by the

REDDOXX Appliance) on the basis of X509v3 certificates or key pairs (asymmetric).