• No se han encontrado resultados

Desarrollo de nanocompuestos de poliamida/sepiolita para aplicaciones industriales

N/A
N/A
Protected

Academic year: 2020

Share "Desarrollo de nanocompuestos de poliamida/sepiolita para aplicaciones industriales"

Copied!
187
0
0

Texto completo

Loading

Figure

Tabla 1.1. Polímeros empleados en automoción.
Tabla 2.1. Principales poliamidas comerciales y productores mundiales.
Figura 2.4. ω-Aminoácidos y ácidos dicarboxílicos obtenidos a partir del aceite
Figura 2.6. Número de publicaciones sobre composites y nanocompuestos de
+7

Referencias

Documento similar

The striking influence of the ligand coating on the ORR electrocatalytic performance was revealed by the comparatively higher differences in the obtained intensity

Due to the lower effective temperature and higher gravity of M dwarfs, the Rb resonance lines show a moderate intensity in these stars and can be rel- atively easily identified in

287 Polynomial models were developed in order to quantify the impact of product a w and storage 288 temperature on the inactivation kinetic values obtained from the selected

The answer is clear in Figure 1c,d, where it is observed that SCDP under compression gave rise to considerably higher values of the tensile stress for a given value of the

Using all the values obtained and performing the iterative process explained in the methods section, it is possible to know the heat losses of the supply water to the outside and

The older group showed higher values of both metrics, indicating a higher activity of their functional networks, despite, as in the case of network strength, only the

However, two empirical methods (Kozeny-Carman and Sauerbrei) yielded the K values closer to our observed results (in situ), and within the K limits given by previous

X, Y, and Z-components of the surface displacement and traction fields for loads with magnitudes of 15%, 10% and 5% of the substrate Young ’s modulus, aligned with the X