• No se han encontrado resultados

Lente de contacto con sensor nano estructurado para la medida y monitorización de la presión intraocular

N/A
N/A
Protected

Academic year: 2020

Share "Lente de contacto con sensor nano estructurado para la medida y monitorización de la presión intraocular"

Copied!
182
0
0

Texto completo

Loading

Figure

Figura 2. A la izquierda, LCRPG semiterminada con el orificio de 3,0 mm en su zona central
Figura 3. Representación esquemática del diseño experimental para calcular la relación entre
Figura  4.  Representación  esquemática  del  diseño  experimental  para  calibrar  la  lente  de
Figura  5.  Representación  esquemática  del  dispositivo  experimental.  El  globo  ocular,  ambas
+7

Referencias

Documento similar

An immediate area of interest for future research is to use the current observation model with sensor gain degradation and transmission delays modelled by Markov chains in

In order to design an irrigation subunit is necessary to combine the hydraulic calculation (flow, diameters and pressure of drip line and sub main pipes) with irrigation

The Dwellers in the Garden of Allah 109... The Dwellers in the Garden of Allah

Management of cuff pressure in adult users with an artificial airway by healthcare professionals in Chile.. Felipe Rosales a,

That conclusion is supported by the following observa- tions: (i) a reduction in the number of granular neurons is observed in dDG of GSK3b mice compared with ventral area;

To calculate the deformation of the structure, it was used a Finite Element Model for a specific geometry and an evaluation of the variation of the pressure field is done to

Given that the automotive industry is characterized by a constant pressure to create relationships with key suppliers, the inclusion of these suppliers in the first

For example, diamond is thermodynamically stable above 1.7 GPa at 0 K, yet the graphite - diamond transformation does not occur at low temperature due to its very large