FINITE ELEMENT MODEL OF REAL FURNITURE IN SMALL ROOMS AT LOW FREQUENCIES
Texto completo
Figure
Documento similar
To calculate the deformation of the structure, it was used a Finite Element Model for a specific geometry and an evaluation of the variation of the pressure field is done to
storage, no significant differences were observed between the lycopene contents at day 0 after the treatments and at 25 days of storage, with the samples pasteurized for 40
Dynamic performance of the ADC versus sampling frequency at F IN of 60 kHz is shown in Fig. For low sampling frequencies, the SNDR remains close to 60 dB and it shows a
No obstante, como esta enfermedad afecta a cada persona de manera diferente, no todas las opciones de cuidado y tratamiento pueden ser apropiadas para cada individuo.. La forma
The expansionary monetary policy measures have had a negative impact on net interest margins both via the reduction in interest rates and –less powerfully- the flattening of the
Our quantitative analysis, then, could be summarised by saying that the differences observed in the frequency of use of connectives between translations and
To evaluate the models’ accuracy, we use the relative error (RE) as the metric to account for the difference between the predicted and measured values of the modeled metrics..
Excellent agreement is observed when spectroscopic parameters obtained at the AE level are compared with the ‘‘best’’ type of AIMP calcula- tions, i.e., when small-core AIMPs