ACOUSTICAL ANALYSIS OF PIPES WITH FLOW USING INVARIANT FIELD FUNCTIONS
Texto completo
Figure
Documento similar
A comparison of the experimental and numerical results for air velocity field, water film thickness and the flow conditions that cause the detachment of droplets
The results of the two-dimensional field of temperature, stream function and fluid velocity components are compared with those obtained using SHEMAT commercial research software..
The data has been obtained from the sampling of the function in (36) , interpreting that this data comes from a cell average discretization of a piecewise continuous and
The function of Ds in this equivalent circuit is to represent the fact that the current can only flow from the positive terminal P to the common terminal C (as in
Pictures 5 to 8 show the structure flow for V4 and V5 joining flow types and T1 and T2 dividing flow types. The contours of total pressure, density and Mach number and the velocity
A comparison between the averaged experimental data obtained with the predicted results from numerical simulation is done for the validation of the model. In table 2, data from
In order to design an irrigation subunit is necessary to combine the hydraulic calculation (flow, diameters and pressure of drip line and sub main pipes) with irrigation
As for the semi-supervised experiments with the data labelled by the k-NN algorithm, analysis of the obtained results (see Figure 4.6) shows that the use of unlabelled data in