• No se han encontrado resultados

Micromechanics as a testbed for artificial intelligence methods evaluation

N/A
N/A
Protected

Academic year: 2017

Share "Micromechanics as a testbed for artificial intelligence methods evaluation"

Copied!
10
0
0

Texto completo

Loading

Figure

Fig. 1. Micromachine tool prototype: 1 – Y-direction drive; 2 - Y-direction guides; 3 – X-direction guides; 4 – X-direction carriage; 5 – X-direction drive; 6 – Z-direction guides; 7 – Z-direction carriage; 8 – Z-direction drive motor; 9 – Z-direction drive gearbox; 10 – chuck support; 11 – chuck; 12 – cutter and measurement tool support
Fig. 3. Examples of micro work pieces manufactured with the first micromachine tool prototype
Fig. 4. Micro assembly system controlled by the vision system
Fig. 6. An example of the input image of the LIRA neural classifier
+3

Referencias

Documento similar

It is possible to produce and replicate micro geometries applied to medical devices with the combination of Selective laser melting for producing net shapes and using

Collectively, our results highlight the importance of as- sessing cell-particle interactions, in terms of cytotoxicity, uptake, intracellular location and cell type effect of

In this case, the measurement is independent of the initial demagnetised state (An experiment with a field applied along only one axis of a crystal yields no useful information

biotechnology , micro-to-nanostructuring, characterization, materials construction and thermo-physiological, sensorial materials, new analytical tools, environment engineering,

On the other hand, after observing the evolution of users in correspondence to the appearance of new social networks and new tools, as well as the formats themselves, which the

Another important concern in the performance of the micro- hot plate is its thermal efficiency. Power consumption should be minimized if the objective is to integrate the sensor

The information assessed by this item should be available if the study was reported following the STROBE statement, as it is required in the items 8 (For each variable of

In  the  search  for  new  alternative  low‐cost  raw  materials,  the  reuse  of  edible  frying  oil