• No se han encontrado resultados

Diagnostic performance of controlled attenuation parameter for predicting steatosis grade in chronic hepatitis B

N/A
N/A
Protected

Academic year: 2020

Share "Diagnostic performance of controlled attenuation parameter for predicting steatosis grade in chronic hepatitis B"

Copied!
11
0
0

Texto completo

Loading

Figure

Table 1. Baseline characteristics of the patients enrolled in the study.
Figure 3. Assessment of the liver stiffness measurement
Table 3. Apparent and validated performance (with confidence intervals) of liver stiffness measurementsfor determining fibrosis.
Table 4. Apparent and validated performance (with confidence intervals) of the controlled attenuation parameter for determi-
+2

Referencias

Documento similar

Specifically, given a fixed obser- vation time interval there exists a tradeoff between accuracy and false alarm probability in our algorithm: the lower the additional service

No obstante, como esta enfermedad afecta a cada persona de manera diferente, no todas las opciones de cuidado y tratamiento pueden ser apropiadas para cada individuo.. La forma

 The expansionary monetary policy measures have had a negative impact on net interest margins both via the reduction in interest rates and –less powerfully- the flattening of the

Jointly estimate this entry game with several outcome equations (fees/rates, credit limits) for bank accounts, credit cards and lines of credit. Use simulation methods to

Figure 6(a) shows the emission spectra generated by the powdered OMHSs in the absence of any applied magnetic field and tissue as obtained for two different 808 nm laser powers..

In this first report we describe data from the cross-sectional phase of the study, which aimed at evaluating: (i) the proportion of patients with controlled, partly controlled

A revision of the methodology for the study of attitudes toward mathematics for the correct validation of the instrument is carried out in this research, and an estimation of

Prediction of safety parameter using a linear regression technique The cross-validation results obtained in this study (Table 2) showed that the best calibration models obtained