• No se han encontrado resultados

Estudi fonamental i aplicat de l'etapa d'eliminació de tinta per flotació

N/A
N/A
Protected

Academic year: 2017

Share "Estudi fonamental i aplicat de l'etapa d'eliminació de tinta per flotació"

Copied!
349
0
0

Texto completo

Loading

Figure

Figura 1.1: Distribució, en percentatge de la producció de paper i cartó a nivell mundial i europeu durant l’any 2004 (CEPI, 2005a)
Figura 1.2: Distribució de la producció mundial de paper clasificada per tipus de paper,      any 2002 (CEPI, 2003)
Figura 1.4: Evolució i tendència de la producció i consum de paper i cartró, a) A nivell mundial, b) A nivell europeu (CEPI, 2005 a)
Figura 1.5: Evolució de la producció i el consum del sector paperer espanyol (Aspapel, 2005)
+7

Referencias

Documento similar

THE EFFECT OF AIR–LUBRICATION ON SHIP FRICTION RESISTANCE 32 scale ship to predict the distribution of the air bubble void fraction on the hull surface, which

K., “Toughening Mechanism in Tetragonal Zirconia Polycrystalline Ceramics”, en advance in ceramics: Volume 24A Science and technology of Zirconia III, Eds S.. J., “Metastability

The results obtained warrant upscaling any of the biobleaching sequences for flax pulp as they provide sustainable flax fibre with a high cellulose content and brightness above

influence of these parameters on the size and distribution of Te inclusions, deep defects, optical and electrical properties of CdZnTe detectors. In the fourth chapter, the effect

Abstract: The present paper is focused on the fluid dynamics of the make-up air at the vents in case of an atrium fire, its influence on the fire-induced conditions and the

Furthermore, two predictive models have been developed (an ARIMA Time Series and an LSTM recurrent neural network) to study how time series models adapt to this type of data..

Total and partial porosities and pore size distribution were analyzed by mercury porosimetry, in order to determine the effect of the leaching process on the

In this paper the design and operation of a HLDS is presented, for the air conditioning of a high latent load application with high ambient humidity levels.. An analysis of