• No se han encontrado resultados

Green roofs and vertical greenery systems as passive tools for energy efficiency in buildings

N/A
N/A
Protected

Academic year: 2017

Share "Green roofs and vertical greenery systems as passive tools for energy efficiency in buildings"

Copied!
87
0
0

Texto completo

Loading

Figure

Figure 1. Global buildings energy consumption by energy source and direct CO2 emissions [1]
Figure 2. Energy savings perspectives to 2050 in EU in the residential and services sub-sectors [1]
Figure 3. Examples of GI in urban areas; (a) Green facade, TRIBU building, Costa Rica; (b) Intensive green roof, London; (c) Extensive green roof, Rooftop Haven for Urban Agriculture,
Table 1. Classification of the 24 different ecosystem services sorted by ME categories
+7

Referencias

Documento similar

of the behavior of the users of the buildings was found to be a concern with rising interest, and a modeling approach was proposed to take advantage of

In this context, the Sustainable Water and Energy Consumption (SWEC) Program was developed to mitigate water and energy supply problems in a railway company in Brazil.. The actions

Thirdly, it is defined the superstructure consisting in the different candidate technologies to consider in the optimization model along with their technical, economic and

The analysis presented shows that energy efficient motors are an opportunity for improving the efficiency of motor systems, leading to large cost-effective energy savings,

 The expansionary monetary policy measures have had a negative impact on net interest margins both via the reduction in interest rates and –less powerfully- the flattening of the

4 we plot the transmission as a function of the inci- dent energy and the applied gate voltage for a metallic armchair nanoribbon system in the 1→1 and 1→2 configurations2. The

In winter time, solar energy is collected by the solar roof to assist the conditioning system in heating the building and producing domestic hot water.. Figure 4, shows a

As the first purpose is to recovery energy during braking, the stored energy is the main criteria, but the storage system has to be power compatible to the energy needs for