Annual atmospheric corrosion rate and dose-response function for carbon steel in Bogotá
Texto completo
Figure
Documento similar
Figure 3 and Figure 4 present the Nyquist diagrams of low carbon steel AISI 1018 registered in the model acetic solution, in the presence of kerosene (hydrocarbon), through
corrosion potential presented by the different systems is -0.60 ± 0.01V vs Hg /HgCl (s) / KCl (sat) (SCE), indicating that the initial surface conditions are nearly the
Apostolopoulos [36] tested under laboratory conditions a steel alloy (S500s, Tempcore), to study the effect of the strain level and the corrosion duration on the number
The corrosion currents, calculated from the R p values (as it is done sometimes in industrial corrosion monitoring), show low variation among them, as the increase
Using the technique of electrochemical impedance spectroscopy (EIS) in combination with the results obtained by analyzing the polarization curves, it was possible to propose
The electrochemical properties of the compounds were analyzed in order to use as corrosion inhibitors for the iron steel surface; in addition, a relationship between the
Our goal was to study immune responses against viral infections in order to obtain potentially useful information for the design of new vaccination strategies, focusing on
Carbon corrosion is considered as a major cause for meso- and macroscale loss in performance. Further, the corrosion can also lead to the dissolution of active sites,