• No se han encontrado resultados

Pantograph noise measurements in Madrid-Sevilla high speed train (AVE)

N/A
N/A
Protected

Academic year: 2018

Share "Pantograph noise measurements in Madrid-Sevilla high speed train (AVE)"

Copied!
8
0
0

Texto completo

Loading

Figure

Figure 3: Passing train pressure history
Figure 6: Angular placement of the train sources.
Figure 7: Pantograph noise level histories
Figure 8 : SEA modeling results
+2

Referencias

Documento similar

Additionally, in order to provide a mechanism for extracting high- level context from low-level information, the system allows the creation of User- defined context reasoning rules in

In order to measure these properties, five types of assays were carried out: toxicity, genotoxicity, antigenotoxicity, cytotoxicity (using the promyelocytic leukaemia HL60 cell

For instance, the best overall accuracy of bagging in Breast with 20% noise is achieved using a 10% sampling ratio: The test error goes from 4.1% when no noise is injected to 3.5%

In particular, different versions of the training set for the base learners can be used, as in bagging (bootstrap sampling of training data), class-switching (noise injection in

The sentences were used in a perceptual task to 18 assess their intelligibility in babble noise across three 19 different signal-to-noise ratio (SNR) conditions in a sample 20 of

Figure 6: Top: Gain versus exposure level measured from noise statistics for amplifier B in high-gain mode.. Bottom: A plot of ADU per second versus total exposure time, corrected

Although in this case there is no sound horizon as the sound speed is zero, the presence of a nonvanishing anisotropic stress creates a new anisotropic horizon in the evolution of

Improving room acoustic conditions over OPOs as quantified by ISO 3382-3 metrics is associated with decreasing satisfaction with the three IEQ performance