• No se han encontrado resultados

High-power, fiber-laser-pumped optical parametric oscillators from the visible to mid-infrared

N/A
N/A
Protected

Academic year: 2017

Share "High-power, fiber-laser-pumped optical parametric oscillators from the visible to mid-infrared"

Copied!
234
0
0

Texto completo

Loading

Referencias

Documento similar

In this work, we exploit the Q-switched single mode operation to increase the peak intensity by designing a stable pump configuration that produces high average output power and

The integrated electronic ballast features high power factor, low harmonic input current and high frequency AC output voltage.. The power stage is based on a single-switch

• Frequency response and inertia analysis in power systems with high wind energy integration en International Conference on Clean Electrical Power Renewable Energy Resources Impact

This value matches pretty well with the obtained position of this reso- nant peak when exciting with the UV laser at 1% pump power (Figure 6c top panel, orange line). Moreover,

In this article, we propose to use mutually delayed and partially overlapping laser pulses, similar to those used in STIRAP and fractional STIRAP, for the optical control of quantum

(a) Angular velocity as a function of the applied laser power and power density for a bare upconverting NaYF 4 :Er 3+ ,Yb 3+ microspinner (black line and hexagons) and for a

Here we use the spectral resolution of the high- order harmonic coherent frequency comb combined with the possibility to tune the laser wavelength, as well as a weak infrared

This paper describes the development of a new gateway consisting of an EIB/KNX input module to connect optical fiber sensors directly to the bus.. 2.- Optical