• No se han encontrado resultados

Developing a dynamic library loader for SODIUM, an educational operating system

N/A
N/A
Protected

Academic year: 2017

Share "Developing a dynamic library loader for SODIUM, an educational operating system"

Copied!
10
0
0

Texto completo

Loading

Figure

Figure 2.  Executable file and shared memory scheme.
Figure 3. The ES register selector is replaced by the dynamic library GDT position
Figure 4. Possible memory setup for memory distribution using dynamic link libraries
Figure 5. The narrow arrows represent the calls to the input PLTs, and the thick The scheme of both –input and output– PLTs placement and function is depicted in ones represents the ones that execute the retf return instruction

Referencias

Documento similar

Difference in their approach and NUBOMEDIA approach is that, they don't provide a full platform for the deployment of applications but offer a platform library for uploading

Serious games (or educational videogames) are considered an important tool for the future education. This is the reason that lot of effort is being put into the analysis

If 28% of the respondents use the library, 90% would visit the library more often with innovative technology and 10% use the physical or virtual library as their first option to do an

If a boundary configuration is defined so that the entire domain is partitioned into simplices and a function value is associated to each intersection (given by a vertex), as

We can see that, for most of the series this normalization has achieved its objective, translating the series into another one that for most of the days is precisely the

Inserting into the flow hash table: The segment data in the GPU segment hash table is inserted in the GPU flow hash table to obtain the number of segments and retransmissions for

2 EM simulation (dashed lines) and equivalent circuit (solid lines) results for the microstrip line loaded with an OISRR: (a) mag- nitude and (b) phase.. The first one is due to

On the other hand, is important to remark that the maximum bending moment usually occurs when the two-three first standard cargo holds are loaded/unloaded and the remaining cargo