• No se han encontrado resultados

Evaluation of physico-mechanical properties of carvedilol-cyclodextrin agglomerates obtained by emulsion solvent diffusion method

N/A
N/A
Protected

Academic year: 2017

Share "Evaluation of physico-mechanical properties of carvedilol-cyclodextrin agglomerates obtained by emulsion solvent diffusion method"

Copied!
1
0
0

Texto completo

Loading

Referencias

Documento similar

obtained for FDTD space size of and up to 32 cores in case of the parallel LOD-FDTD method with Debye media and the parallel ADI-FDTD method in single precision.. methods

To reconstitute the powder, the pre-filled syringe with solvent should be used with a needle or a vial adapter to inject the 1.2 ml of the solvent (sodium chloride 5.4 mg/ml

the body by faeces, together with the fact that low levels of gold was measured in urine but high concentrations of this element were present in the kidney (as stated by

In the present paper we obtain an approximate expression for the periodic solutions of a nonlinear oscillator typified by a mass attached to a elastic stretched wire by means of

The present work analyses the extraction of the discontinuity sets of a rock slope using 3D point clouds, obtained by means of a TLS and SfM techniques, where the GCP are

We observe large, boosted spiral and target patterns which are caused by the competition of the chemical reaction and a turbulent diffusion provoked by the turbulent fluid flow..

This study is based on the implementation and application of the case study method in Higher Education teaching (University Master's in Teacher Training) by the use

Thus, if the domain of the aggregation function F is the set B n of all the profiles where a vertically complete and vertically restricted relation that holds the tertio