• No se han encontrado resultados

Using a regulator for a servomotor model designed for a prosthetic joint

N/A
N/A
Protected

Academic year: 2017

Share "Using a regulator for a servomotor model designed for a prosthetic joint"

Copied!
10
0
0

Texto completo

Loading

Figure

Fig. 1. Block diagram of the control system in the state space.
Fig 2. Poles of the diferents systems
Fig. 3 Responses of different systems to new poles
Fig. 4. Diagram in the state space. Search chosen. Improved gain with J2.

Referencias

Documento similar

The design method is proposed for the nonlinear feedback cascade system, so it can be used for all the underactuated mechanical system that can be transformed to the cascade

Also, using this general principle, we show that for the universal maximal Kakeya operator it is possible to give a uniform weak type bound on L n (R n ) when the action is

This implies a positive answer for RQ1, since it is possible to make an equivalence between a rating-based item-based CF system and an IR system by means of identifying the terms

The aim is to build a system that will measure the performance parameters of throughput, packet losses, jitter and one-way delay using the technique of the packet time-stamping..

On the other hand at Alalakh Level VII and at Mari, which are the sites in the Semitic world with the closest affinities to Minoan Crete, the language used was Old Babylonian,

The general idea of the language is to “thread together,” so to speak, existing systems that parse and analyze single web pages into a navigation procedure spanning several pages of

Construction of a UML model for SWN analysis The input to the method is a UML design that consists of a set of SMs, modeling the behavior of system compo- nents (classes), and

No obstante, como esta enfermedad afecta a cada persona de manera diferente, no todas las opciones de cuidado y tratamiento pueden ser apropiadas para cada individuo.. La forma