• No se han encontrado resultados

Empirical mode decomposition processing to improve multifocal visual evoked potential signal analysis in multiple sclerosis

N/A
N/A
Protected

Academic year: 2020

Share "Empirical mode decomposition processing to improve multifocal visual evoked potential signal analysis in multiple sclerosis"

Copied!
17
0
0

Texto completo

Loading

Figure

Fig 1. General diagrams of the blocks. https://doi.org/10.1371/journal.pone.0194964.g001
Fig 2. Typical mfVEP analysis method. Upper left: stimulus and recording process; lower left: 60-sector signal map for each of the six channels; lower right: 60-sector signal map for each of the six channels after 1–35Hz bandpass filtering; upper right: 60
Fig 3. Original signal and IMF 1 –IMF 4 from the OD (black) and OS (red) from a control subject
Fig 6. Example X DFT and X EMD . Ring 5 signals are colored in green. https://doi.org/10.1371/journal.pone.0194964.g006
+5

Referencias

Documento similar

Therefore, we propose the implementation of a control algorithm based on G-language to control a novel servo-mechanized laser device for rehabilitation in visual

Using a kinematic analysis, this study aims to find out the existence of visual signals (pre-cues) in drive strokes made from the back of the court after the ball hits a

In this paper we describe how the knowledge related to a specific domain and the available visual analysis tools can be used to create dynamic visual analysis systems for video

In the processing of subtitled content, the visual system has to decode two different sets of information, on the scene (understood as what happens in the visual narrative of the

The purpose of this study was to determine the influence of visual behaviour (visual fixation location, number and duration) on decision making in volleyball blocking.. The

Secondly, empirical research contributes to the literature in different ways: how innovation capability influences open innovation practices and performance in the SME context and

Figure 4.13 and 4.14 display the response of the discrete sliding mode controller and control signal of the treadmill speed based on the parameters of the model at the treadmill

The probe can operate in three modes: constant potential mode, where topographic scans are captured; constant height mode, to map the electrochemical potential distribution across