• No se han encontrado resultados

Prediction of Die Wear in Warm Forging Process with Forward Extrusion Operations-Edición Única

N/A
N/A
Protected

Academic year: 2017

Share "Prediction of Die Wear in Warm Forging Process with Forward Extrusion Operations-Edición Única"

Copied!
94
0
0

Texto completo

Loading

Figure

Figure 4.1 Schematic demonstration of abrasive wear and affecting parameters.
Figure 4.3 Methodology for Wear Model application in Abrasive Wear Prediction
Figure 5.1 Forward Extrusion Station in a Warm Forging Process
Figure 5.3.
+7

Referencias

Documento similar

This paper shows the results of the application of a project-based learning methodology that blended flipped classroom and face-to-face sessions, along with creativity and

To search the preliminary information and to learn about some of the most relevant structural analysis with the Finite Element Method (FEM), such as modal analysis of

Abstract: Simulation is a very useful tool in the design of the part and process conditions of high- pressure die casting (HPDC), due to the intrinsic complexity of this

According to the above, the main objective of this thesis is to carry out a conceptual and empirical analysis on the behavior of immigrant entrepreneurship with respect to

Consistent with the improvement in the rationality and transparency of public spending, this work relates two main research areas: Defence Economics and Analysis of

In this work, with the main objective of defining the impact that incorporation of this group of foreign residents in healthy and non-healthy life expectancy has on the

Accordingly, the increase in government spending (that in this case is equivalent to an increase of the budget deficit) will induce a direct (through its purchases) and

In this context, the algorithm was conceived to treat with finite state machines and other similar machines. The main features of evolutionary programming ap- peared to fulfill