• No se han encontrado resultados

Revista Ingeniería Investigación y Tecnología | Facultad de Ingeniería UNAM

N/A
N/A
Protected

Academic year: 2020

Share "Revista Ingeniería Investigación y Tecnología | Facultad de Ingeniería UNAM"

Copied!
12
0
0

Texto completo

Loading

Figure

Figure 1. Full bridge inverter diagram
Table 1. Voltages levels by turning on and off the switching devices
Figure 3. Block diagram of the proposed  prototype
Figure 4. Full-bridge inverter developed on Pspice 8.0
+6

Referencias

Documento similar

Different small letters mean significant differences between irrigation seasons for each emitter type discharge while different capital letters mean significant differences

In addition, the size distribution of carbon coated iron nanoparticles is broad by using this method as shown in TEM image (a) and size distribution histogram (b) of Figure

The content of this dissertation comprises the design of two arc-discharge plasma (ADP) reactors (a conventional and a modified one); the experimental study of the different

The motor-compressor electrical power consumption, cooling capacity, discharge temperature, and refrigerant mass flow rate objective functions are achieved with the help of

A reduced barrier layer thickness was revealed in the specimen anodised in the presence of molybdate, as a consequence of the increase of the resistance of the

We derive a microscopic expression for the dielectric susceptibility χ of a Coulomb glass, which corresponds to the definition used in classical elec- trodynamics, the derivative of

M ODAL stirrers are the most widely accepted method to improve the uniformity of heating patterns on dielectric materials processed in multimode applicators, thus avoiding un-

Both solutions, a hybrid enclosure (metallic layer + conductive dielectric layer), and just a conductive dielectric offer similar results, which increase the shielding