• No se han encontrado resultados

Pulsed x rays dose measurements from a hundred joules plasma focus device

N/A
N/A
Protected

Academic year: 2020

Share "Pulsed x rays dose measurements from a hundred joules plasma focus device"

Copied!
8
0
0

Texto completo

Loading

Figure

Figure 1 Experimental arrangement for dose measurement using TLD-100 dosimeters (a) inside and outside the PF-400J vacuum chamber simultaneously (b) outside the vacuum chamber only, with the use of plastic material as vacuum window
Figure 2 Schematic arrangement of dosimeters (TLD-100) in (a) inside and (b) outside arrays and obtained dosis (c) inside and (d) outside the PF-400J vacuum chamber, respectively
Figure 3 Dosis obtained with the use plastic vacuum window. Dosimeter array was  kept outside the vacuum chamber over the plastic window.

Referencias

Documento similar

For example, there are companies where the development teams are fully responsible for the QA. In general, even for startups, it is quite normal to have dedicated people doing

Top panels: HCO + /HOC + ratios for dense and diffuse H II regions, as well as quiescent regions, as a function of the H 2 column density (left panel), electron density (middle

Right time series shows some days of measurements from an LTE network where variations of the network performance are observable.. Fewer measurements were taken at the LTE network

The proposed reliability measure (the R-measure) analyses the shape of the focus measure function and estimates the likelihood of obtaining an accurate depth estimation without

The fluxes obtained from the OM pho- tometric measurements must be taken only as indicative, since the conversion from count rate to flux is made assuming a white dwarf-like

Then, we further contribute by developing a complete conceptual nanodevice layout taking into consideration its ultra-small size (similar to a blood cell) and its very

Sovereignty: Freedom of access and implementation from design to production Open Collaboration: Faster time to market, community, leverage existing open

–  Data copies to/from device memory –  Manual work scheduling.. –  Code and data management from