THE DEVELOPMENT OF AN ANDROID APP AS A TOOL FOR LEARNING AND DESIGNING DCDC CONVERTERS

If the electrolytic capacitor of an AICS is removed, then low-frequency ripple arises at its intermediate dc bus, adding some distortion in the line input current over the

The power processing circuit (PPC) created by the evolutionary algorithm is connected on one side to an input voltage source V in , and on the other side to an output circuitry made

rGO-ODA was used as a filler in the preparation of TFN membranes using two different concentrations in the organic phase for the interfacial polymerization: 0.03% (w/v) and

It is distinguished two ways of efficiency measurement: in the direct method, the input and output power are measured directly, as the expression (2); and the indirect

of emissions. Likewise, since official data informs about emissions generated by domestic production, this region should actually be less responsible for the environmental

The output op-amp IC2 is used as a summing amplifier with the CAMAC DAC derived velocity demand connected to the -ve input and the drive motor tachometer feedback to the +ve

Many active input current shapers [l-61 have been proposed in this way to avoid the traditional drawback of poor dynamic output voltage reguIation thanks to its fast

The principle behind this meth- od shown in Figure 1 is to create the desired channel model by positioning an arbitrary number of probe antennas in arbitrary positions within