• No se han encontrado resultados

Smelting in cupola furnace for recarburization of direct reduction iron (DRI)

N/A
N/A
Protected

Academic year: 2020

Share "Smelting in cupola furnace for recarburization of direct reduction iron (DRI)"

Copied!
22
0
0

Texto completo

Loading

Referencias

Documento similar

This curve shows a reduction process (a) followed by another process (b) this behavior, attributed to the reduction of the environment since according to the

However, mortars made with recycled aggregates from CDW are more porous than those made with natural aggregates, which can impair the diffusion leaching phenomena of monolithic

The simulation results show a reduction of around 25% in total power loss, a reduction of around 40% in the maximum junction temperature increase above ambient

For instance, (i) in finite unified theories the universality predicts that the lightest supersymmetric particle is a charged particle, namely the superpartner of the τ -lepton,

Xu et al.(1998) found no reduction in farrowing rate when reducing the sperm concentration of the boar dose, but they found a reduction in litter size. Environmental permanent

If the furnace design control is essential for promoting a given interface shape (Lun et al. 2006), other complementary approaches are also very important which

This work analyzes energy consumption, charge reduction and warming impact when ice slurry based cooling systems are used to replace direct expansion milk cooling systems.. The

5.6 Inter-resonator effective Q-factor for different thicknesses of a rect- angular iris and S 2,1 at center frequency of a filter designed with the corresponding inter-resonator