• No se han encontrado resultados

Designing an Embedded Tra c Dynamics Meter: A case study

N/A
N/A
Protected

Academic year: 2020

Share "Designing an Embedded Tra c Dynamics Meter: A case study"

Copied!
164
0
0

Texto completo

Loading

Figure

Figure 2.1: Architecture of conducing Big Data analytics in ITS. Reprinted from [9]
Figure 2.2: Collecting traffic information from SUM. Reprinted from [13]
Figure 2.5: Haar-like features. Reprinted from [30]
Figure 2.7: MOSSE filter tracker results. Reprinted from [38]
+7

Referencias

Documento similar

After each competition round, students were requested to optionally fill a short form, asking them about the difficulty and time they spent in performing the competition tasks

The world is increasingly turning into a global zone where communicating becomes imperative. As a consequence of this globalisation, a common language should be

Based on the proposed uncertainty analysis, a reliability map is built for an industrial anaerobic co-digestion biogas plant for a given set of substrates mixture input loads..

In all cases it was proved that when the mutation rate is small, the equilibria of these systems for the densities with respect to the evolutionary variable tend to concentrate at

Building a custom Embedded Linux OS involves creating a kernel image with its required libraries, the packets to support the hardware devices and software applications,

This work is an extension of the Proceedings of the International Conference on Industrial Engineering, Management Science and Applications, which presented some of the phases

6 Weka Machine Learning tool, http://www.cs.waikato.ac.nz/ml/weka/.. The transaction date field was provided in one valid format and presented no parsing problems. This

If the results of my empirical analysis demonstrate, as I have hypothesized, that the accumulated exposure to television, and party identification make