• No se han encontrado resultados

Multiscale Modeling of Composites: Toward Virtual Testing ... and Beyond

N/A
N/A
Protected

Academic year: 2020

Share "Multiscale Modeling of Composites: Toward Virtual Testing ... and Beyond"

Copied!
11
0
0

Texto completo

Loading

Figure

Fig. 1. Comparison of the mechanical properties of composites with  other materials, (a) Specific stiffness versus specific strength and (b)  strength versus fracture toughness
Fig. 2. Hierarchical structure of composite materials, showing the three entities, their relevant length scale and their dominant energy dissipation  mechanisms, (a) ply, (b) laminate, and (c) component
Fig. 4. Development of damage at the notch root as a function of the applied load in a cross-ply epoxy/glass [0/90] 4s  laminate
Fig. 5. Local-to-global multiscale simulation strategy to carry out virtual mechanical tests of composite materials
+5

Referencias

Documento similar

The draft amendments do not operate any more a distinction between different states of emergency; they repeal articles 120, 121and 122 and make it possible for the President to

Engineering Modeling Using Dynamic Systems Structural Analysis of Organic Molecules and their Properties. Application of the Principles of Conservation of Matter

The acid doping enhanced proton conductivity of PBI membranes and, after doping, these conducting materials maintained their mechanical properties and thermal stability for

cases are too ephemeral to be sensed because they transform rapidly and/or their concentration is too small. [7] In other instances, the structure of these intermediates can

How can be these alternative uses of entrepreneurial capacity –and their different conse- quences in terms of economic growth- be integrated in a single model without assuming

Through this manuscript was presented the behaviour of different compositions of metal- lic glasses as a response to an additional variable, namely pressure for the analysis

verse, including cases like explanations in terms of bowtie structures, in terms of the topo- logical properties of the system, or in terms of equilibrium. The role of

We compare the mechanical properties of fibers made of polymers and of composites with pristine single-walled carbon nanotubes (SWNTs), mechanically interlocked