Improved estimation of PC Saft equation of state parameters using a multi objective variable weight cost function
Texto completo
Figure
Documento similar
The aim of this study is to provide new rational and objective indices that accurate- ly quantify the morphogeometric changes associated to the clinical evidence of corne- al
The objective of the present work was to understand the effect of system design parameters (i.e. polymer composition, molecular weight, and TLL) on the discrete
The basic geometric assumption, as well as the main theoretical results concerning the estimation of the boundary measure L 0 , are established in Section 3.. To be more specific,
Experimental results with 17 leather samples in an pre-industrial installation have verified the capabilities of the proposed model for the 18 estimation of optimum non-variable
The independent variables that best relate to the bulk density of metallic pieces produced by selective laser melting and are therefore included in the dimensional analysis
Therefore, equation (8) gives us an alternative method to estimate the variance- covariance matrix of the changes in a vector of k interest rates using the estimation of the
Table 3: Objective values and runtime spent in the search of the optimal solution using cost functions considering fuel and number of UAVs with different percentages.. Cost
These measurements are the corner- stone for the validation of Service Level Agreements (SLA) with multiple shaping elements along an end-to-end path. As a further outcome of