Isomerization of Pinene with Al and Ga modified MCM 41 Mesoporous Materials

1. Lucene: We have compared two versions of this algorithm, with and without normalization, and the best results were obtained with Lucene Normalized and a neighborhood size of

1. Lucene: We have compared two versions of this algorithm, with and without normalization, and the best results were obtained with Lucene Normalized and a neighborhood size of

In nano- materials the charge carriers are generated at the surface due to its reduced size (increased surface to volume ratio), shape and controlled morphology and so the

extracted, concentrations of arsenic in both surface and soil pore water are of concern.. Some possible remediation strategies that take into account the presence of both

Small differ- ences between the mean pore size measured by both methods are expected since in the bubble point method the mean pore diameter corresponds to a flow of a value of half

This latter objective function is usually used in the field of structural optimisation, although it is interesting to keep others in mind such as the strain energy, because of

Two selected samples of moringa seed husk char showing different pore structure were tested in carbon dioxide adsorption.. To check the positive influence of the morphology of

The pore size distribution evaluated using the DFT method confirms the micro-mesoporous texture of the pristine carbon (Fig. The average micropore size is calculated as