Electrodialytic processes in solid matrices. New insights into batteries recycling. A review.

The highest copper extraction rate working at room temperature of 71.23% was obtained with a low concentration of sulfuric acid (0.5 M), a high concentration of chloride (100 g/L)

“Cost-effective 10-Gb/s optical duobinary transmission systems using a nonbuffered X-Cut LiNbO3 mach zehnder modulator,” IEEE Phot.. Bossi., “A review of lithium niobate modulators

Evolution of the Coulombic efficiencies with the number of cycles for Gr−LFP cells cycled at 1 C varying with the content of VC in the electrolyte: 0, 2, and 6 wt %, (A) in the

Predicting the lifetime of a lithium-ion battery is of pivotal impor- tance for many applications. In such applications, the battery operating profile should be characterized in

Waste solid materials, derived from the geothermal energy conversion process, were successfully used in solvent- and organic-free synthesis of nanostructured composites based

Data obtained from HPLC and FIA analyses of the chemical variables (sugars, organic acids, amino acids, pectins, and polyphenols) involved in the process of fruit senescence

Finally, high molecular weight HFEs, such as HFE-7500 and HFE-7300, exhibit lower saturation pressures and high normal boiling points, being a clear disadvantage when choos- ing an

Then, the present thesis focuses on the synthesis, characterisation and application of layered/spinel-type lithium manganese oxide nanocomposites as precursor materials for the