Modeling, Analysis and Simulation of a DC Distributed Power Architecture for an Airborne Application

Observing the figure, in every environment it can be seen that the received signal strength by the sensor decreases when the transmission power diminishes and the distance

Firstly, considering CPVMatch module specifications, number of modules in the system and potential mismatching sources, a buck converter has been determined as the

The sensor technology par excellence for measuring the Earth magnetic field vector is the fluxgate because it is the best trade-off between resolution, stability and

On Modeling and Parameter Es- timation of Brushless DC Servoactuators for Position Control Tasks.. Proceeding of the 17th

Power leakage through the doors and windows can be sensed as interference by the passing macrocell users, and consequently the signal quality attenuates, because if the

This paper deals with the switching signal design to robust exponential stability for uncertain discrete-time switched systems with interval time-varying delay.. The lower and

The signal-to-noise ratio (SNR) is calculated as the difference between the noise level of the system and the level of power that reaches our photodiode. We will make a

Labels to show the simulation data (speed and position block) ... Configuration parameters of the motor and driver subsystem ... Simulation of DC motor operation. Closed control