FLAT PANEL MONITORS. Small Size VGA

(1)

FLAT PANEL MONITORS

DISPLAY 9-18 Vdc Concentric 4W Max. 0 to 50°C -20 to 60°C Operating Temp

:

Storage Temp: DC Model: Connector: Power Consumption

:

Due to a policy of continuous product development KME reserves the right to change specifications and descriptions without prior notification. All trade marks acknowledged. 29k035002 11/2006

RGB Signal Input Connectors: Sync. Type/Level: Resolution: Controls: Analog 0.7Vp-p 15-pin HD Female

Separate H&V (+/-ve) TTL 640x 480 VGA

Power switch, Brightness,

_{• Small and slim 3.5” display with VGA}

standard input.

• Designed for portable applications.

• Suitable for applications in which available

space and high resolution are key

requirements.

• Integrated 4 wire Resistive Touch-screen

SIGNAL INPUTS

29K03500(3/4)

3.5” VGA TFT MONITOR KIT

POWER

PHYSICAL/ENVIRONMENTAL

Small Size VGA

Transflective 262k 640x480 71.04 x 53.28mm LED 150 cd/m² typical

1000 cd/m²equivalent in direct sunlight

160o _{H / 160}o _V

Type: No. Colours: Max. Resolution: Active Display Area: Backlight:

Brightness - Transmissive

Brightness - Transflective Viewing Angles:

KME has developed this display module for applications which require small size but need a high resolution display. This makes the kit particularly suitable for portable applications. Displays of this type are usually found only in embedded systems and in portrait mode. KME has uniquely developed a controller board to enable this display to be used with a standard HD15 VGA input and for it to be used in the more usual landscape mode.

The kits comprise 3.5” TFT panel, display controller board and USB or RS232 touch controller board. The kits are readily adaptable to be mounted in a variety of housings or enclosures, alternatively KME is able to take your design requirement to develop custom housings.

Kent Modular Electronics Limited

611 Maidstone Road, Rochester, Kent ME1 3QL, UK

Tel: +44 (0) 1634 830123 Fax: +44 (0) 1634 830619

E-mail:

sales@kme.co.uk

URL: http://www.kme.co.uk

PART NUMBERS

29K035003 29K035004 Kit with RS232 touch

(2)

CHASIS DE MONITOR PLANO

29LS065(31MP) SERIES

MONITOR EN CHASIS DE

6.5" LCD

PANTALLA Tipo: Nº. Colores: Resolución Max.: Área active : Iluminación: Duración ilum.: Brillo: Angulo de visión: Relación contraste AM Colour TFT 256k 640 x 480 pixels 134.5 x 101.4 mm Dual edge CFL x 2 40,000 hours typical 400cd/m2 55° Izq. 55° Derecha 60° Arrib, 30° Abajo 300:1 ENTRADAS DE SEÑAL Entrada A: RGB: Conector entrada: Tipo de sinc./Nivel: Entrada B: Video: Conector entrada: Tipo de sinc./Nivel: Resolución Max.: Barrido Hor.: Barrido Vert.: RGB Analog. 0.7-1.0Vp-p 15-pin HD Female H&V Separados(+/-ve) TTL PAL or NTSC standard RCA Compuesto (CVBS) 1Vp-p 640 x 480 VGA 15kHz (PAL) - 38kHz 50 - 70Hz CONTROLES Set Up Controls: OSD Functions: Botones en la parte trasera, OSD

Frequencia, clock, fase, H & V centrado y, brillo

ALIMENTACIÓN Voltios: Conector entrada: Consumo 12Vdc 3-pin 15W max. MEDIDAS / ENTORNO Dimensiones (aprox): Peso (aprox): Caja: Temp. trabajo: Temp almacen.: 189 x 171 x 66.5 mm 1.5kg.

Acero pintado (Gris)

0 to 500 C -20 to 600 C

NUMERO DE PIEZA

Modelo estandar: Fuente AC pack Con pantalla tactil: (Resistiva)

29LS065E31MP/2 20BK0220/1 29LS065ER31MP/2

• Pantalla lista para integrar.

• Panel TFT de alto brillo & bajo consumo

• VGA (640 x 480 pixels) + PAL/NTSC

• Fijacion superior e inferior.

•

12Vdc (Opción 9-30Vdc, no regulado).

•

Opción pantalla táctil, Resistiva.

• Conexiones traseras para montaje compacto.

La serie de monitores LCD 29LS065(31MP) ha sido diseñada para aplicaciones industriales en el campo del control y para usuarios que requieran un monitor compatible VGA o PAL/NTSC con unas dimensiones pequeñas, alto brillo y amplios ángulos de visión. La robusta caja de metal del monitor asegura una excepcional estabilidad especialmente importante cuando hay pantalla táctil. Marcos de sujeción ajustables proporcionan un perfecto ajuste al panel de montaje del OEM.

La serie de monitores 29LS065(31MP) utiliza la ultima serie de paneles planos TFT 6.5" VGA.

KME ha añadido una versátil tarjeta de interfase Analógica-Digital, inversor para iluminación trasera y controles OSD.

Todos los elementos, incluyendo un cristal reforzado de protección, han sido incluidos en una compacta y sólida caja de metal. El resultado es una cabeza de pantalla lista para integrar en cualquier sistema, como monitor analógico en una interfase hombre maquina mediante pantalla táctil.

(3)

189.0 Max

Active Area=

134.5x101.4

1

4

4 .0

M

a

x

Signal Input

Touch Screen*

FRONT VIEW SIDE VIEW

BOTTOM VIEW REAR VIEW

157.4

1

7

0 .8

93.1

1

5

6 .1

1

6

1 .6

All dimensions in millimetres (Not to scale)

29ls065(31mp2)2 06/2005

(4)

MONITORES PLANOS

KME Displays

ENTORNO / MEDIDAS

SERIE 29LS081(51UN)

MONITOR LCD DE 8.4"EN CHASIS

PANTALLA SEÑALES DE ENTRADA ALIMENTACIÓN NUMEROS DE PIEZA Tipo: No. Colores: Max. Resolución: Área de Display Activa: Protección de pantalla: Backlight: Duración Backlight: Brillo: Relación de Contraste: Ángulos de visión: Video: Conector entrada: Tipo Sync. Nivel: Soporte Multiscan Barrido Horizontal : Barrido Vertical: Clock Rate: Controles: (Botones On Screen Display detrás) Modelo AC : Modelo DC : Conector: Consumption: Modelo DC: Alimentador AC: Dimensiones (aprox.): Peso (aprox.): Temp. Operación: Temp. Almacenado:

• Panel TFT de Alto brillo/ Alto contraste

• Frecuencia horizontal entre 15 to 60kHz

• Frecuencia vertical entre 40 y 100 Hz.

• Programable para señales antiguas no estándar.

• 12Vdc ( Opcional 110/230Vac & 24Vdc )

• Cumple requerimientos EMC de la CE.

•

Integración de pantalla táctil opcional

La serie de monitores LCD 29LM081(51UN) ha sido diseñada para aplicaciones industriales en el campo de control y otros usos que requieren un monitor compacto VGA con pequeño tamaño y alto brillo con buenos ángulos de visión. La robusta construcción en metal asegura una Buena estabilidad especialmente importante cuando se utiliza la pantalla táctil. Soportes ajustables facilitan su montaje en un panel.

La tarjeta A/D KME ha sido diseñada para aceptar un amplio rango se temporizado de señales desde 15 Khz hasta

estándares VGA, incluyendo CGA & EGA

Los controles para ajustar el monitor están en la parte trasera. Una vez ajustados no es necesario cambiarlos y el monitor almacena el último ajuste.

Las señales analógicas & TTL se conectan mediante un conector 15D. Se suministra un cable de 2m VGA.

lautronic, SA puede suministrar opcionalmente un cable

9D-15D o BNC a 15D según sea necesario.

TFT AM p-Si Color 256k 640 x 480 pixels 170.4 x 127.8 mm Cristal endurecido Dual Edge CFL x 2 50,000 hours typical 400 cd/m2 tipica 450:1 130°H, 110° V Analógico RGB 0.7-1.0Vp-p 15-pin HD hembra

Separado H&V (+/-ve) TTL o Compuesto (-ve) TTL

o Sync-on-Green (-ve) 0.3V p-p 640 x 480 VGA

640 x 400 640 x 350

& otros modos programados en el rango de 15-30kHz.

15 – 60kHz 40 – 100Hz 80MHz max. Brillo, Contraste, H/V Posición & tamaño, Frecuencia, Frecuencia Fina,

Color

Alimentador Externo AC/DC 110/230Vac 50/60Hz 12Vdc 3-pin Circular 25W tipico 222 x 162 x 70 mm 2.5 kg. 00 to 500 C -200 to 600 C 29LS081E51UN 20BK0220/1

Señales antiguas & VGA

(5)

SERIE 29LS081(51UN) SERIES MONITOR EN CHASIS LCD 8.4"

170.4 (Active Area) 1 6 1 .6 70.0 All controls & inputs on rear.

All dimensions in Millimetres (Not to scale) 1 2 7 .8 ( A c ti v e A re a ) 80.0 1 7 7 .2 1 8 9 .6 221.7 8 0 .7 C tr BNC (Where fitted) 15D 9D Touch

(Where fitted) Power Input 195.5

(6)

MONITORES PLANOS

KME Displays

SERIE 29LS081(61MP)

MONITOR LCD DE 8.4"EN CHASIS

PANTALLA SEÑALES DE ENTRADA ALIMENTACIÓN NUMEROS DE PIEZA Tipo: No. Colores: Max. Resolución: Área de Display Activa: Protección de pantalla: Backlight: Duración Backlight: Brillo: Relación de Contraste: Ángulos de visión: Entrada A: RGB: Conector entrada: Sinc Tipo nivel

Entrada B:

Vídeo

Conector entrada Sinc Tipo nivel Barrido Horizontal : Barrido Vertical:

Controles:

Mandos ajuste detrás

Modelo AC : Modelo DC : Conector: Consumo: Modelo Estandard: Alimentador AC: Dimensiones (aprox.): Peso (aprox.): Caja: Temp. Operación: Temp. Almacenado:

• Panel TFT de Alto brillo/ Alto contraste

**• Resolución VGA 640 * 480**

• Controles OSD detrás.

• Robusto chasis para montaje trasero en paneles

• Entrada PAL/NTSC como estándar.

•

Integración de pantalla táctil opcional.

•

Preparado para control OSD remoto.

La serie de monitores LCD 29LS081(61MP) ha sido diseñada para aplicaciones industriales en el campo de control y otros usos que requieren un monitor compacto VGA La robusta construcción en metal hace que sea ligero y robusto. Soportes ajustables facilitan su montaje en un panel La serie de monitores LCD 29LS081(61MP) incorporan una entrada PAL/NTSC además de la entrada RGB ampliando el campo de utilización a la seguridad, vigilancia y sistemas de vision de maquinas. Los conectores de alimentación y señales salen verticalmente por detrás permitiendo tener la profundidad del monitor controlada.

Han sido diseñados como una alternativa de costo reducido a la serie 51 UN que están diseñados específicamente para señales antiguas hasta la resolución VGA.

TFT AM p-Si Color 256k 640 x 480 pixels 170.4 x 127.8 mm Ninguna Dual Edge CFL x 2 50,000 horas tipicas 400 cd/m2 tipica 450:1 130°H, 110° V Analógico RGB 0.7-1.0Vp-p 15-pin HD hembra

Separado H&V (+/-ve) TTL PAL o NTSC estandard RCA Compuesto (CVBS) 1Vp-p 15 Khz (PAL) -38 Khz 50 – 70Hz Ninguno

Auto ajuste y mandos OSD

Alimentador Externo AC/DC 110/230Vac 50/60Hz 12Vdc. 0,8 Amp aprox. 2,1 mm 20W típico 215 x 183 x 52 mm 1,3 kg. Aluminio pintado 00 to 500 C -200 to 600 C 29LS081E61MP/1 31PR00072-1 2/1

(7)

SERIE

29LS081(61MP) MONITOR TFT CHASIS 8.4"

All dimensions in millimetres (Not to scale) 170.4 (Active Area) 1 2 7 .8 ( A c ti v e A re a ) 1 8 2 .9 ( E x c B ra c k e ts ) 9 1 .5 ( C tr ) 2 0 6 .9 1 9 6 .9 ( C tr s ) 120.0 (Ctrs) 175.7 214.7 Y/C (S-VHS) Input VGA Input

Video Input (RCA Connector) M4 Fixing Holes

* Where Fitted.

Power Input

(8)

MONITORES PLANOS

KME Displays

SERIE 29LS081(51UN)

MONITOR LCD DE 8.4"EN CHASIS

PANTALLA SEÑALES DE ENTRADA ALIMENTACIÓN NUMEROS DE PIEZA Type: No. Colores: Max. Resolución: Área de Display Activa: Protección de pantalla: Backlight: Duración Backlight: Brillo: Relación de Contraste: Ángulos de visión: Video: Conector entrada: Tipo Sync. Nivel: Soporte Multiscan Barrido Horizontal : Barrido Vertical: Clock Rate: Controles: (Botones On Screen Display detrás) Modelo AC : Modelo DC : Conector: Consumo: Modelo DC: Alimentador AC: Dimensiones (aprox.): Peso (aprox.): Temp. Operación: Temp. Almacenado:

• Panel TFT de Alto brillo/ Alto contraste

• Frecuencia horizontal entre 15 to 60kHz

• Frecuencia vertical entre 40 y 100 Hz.

• Programable para señales antiguas no estándar.

• Operación a 12Vdc ( Opciones a 110/230Vac &

24Vdc )

• Cumple requerimientos EMC de la CE.

•

Integración de pantalla táctil opcional

La serie de monitores LCD 29LS081(71UN) ha sido diseñada para aplicaciones industriales en el campo de control y otros usos que requieren un monitor compacto VGA con pequeño tamaño y alto brillo con buenos ángulos de visión. La robusta construcción en metal asegura una Buena estabilidad especialmente importante cuando se utiliza la pantalla táctil. Soportes ajustables facilita su montaje en un panel.

La tarjeta A/D KME ha sido diseñada para aceptar un amplio rango se temporizado de señales desde 15 Khz hasta

estándares VGA, incluyendo CGA & EGA

Los controles para ajustar el monitor están en la parte trasera. Una vez ajustados no es necesario cambiarlos y el monitor almacena el último ajuste.

Las señales analógicas & TTL se conectan mediante un conector 15D. Se suministra un cable de 2m VGA.

lautronic, SA puede suministrar opcionalmente un cable

9D-15D o BNC a 15D según sea necesario.

TFT AM p-Si Color 256k 800 x 600 pixels 170.4 x 127.8 mm Cristal endurecido Dual Edge CFL x 2 50,000 horas típicas 350 cd/m2 típica 500:1 120°H, 100° V Analógico RGB 0.7-1.0Vp-p o TTL RGB > 2,75 Vpp. 15-pin HD hembra

Separado H&V (+/-ve) TTL o Compuesto (-ve) TTL

o Sync-on-Green (-ve) 0.3V p-p 800 x 600 SVGA

640 x 480 VGA

& otros modos programados en el rango de 15-30kHz.

15 – 60kHz 40 – 100Hz 80MHz max. Brillo, Contraste, H/V Posición & tamaño, Frecuencia, Frecuencia Fina,

Color

Alimentador Externo AC/DC 110/230Vac 50/60Hz 12Vdc 3-pin Circular 25W típico 222 x 162 x 70 mm 2.5 kg. 00 to 500 C -200 to 600 C 29LS081E71UN 20BK0220/1

Señales antiguas & SVGA

(9)

SERIE 29LS081(71UN) SERIES MONITOR EN CHASIS LCD 8.4"

Where Fitted*

(10)

FLAT PANEL MONITORS

PHYSICAL / ENVIRONMENTAL

29LS101(61MP) SERIES

10.4" LCD CHASSIS MONITORS

DISPLAY SIGNAL INPUTS POWER INPUTS PART NUMBERS Type: No. Colours: Max. Resolution: Active Display Area: Display Protection: Backlight: Backlight Life: Brightness: Contrast Ratio: Viewing Angles: Input A: RGB: Input Connector: Sync. Type/Level: Input B: Video: Input Connector: Sync. Type/Level: Multiscan Support: Horizontal Scan: Vertical Scan: User Controls: Set Up Controls: AC Model: DC Model: Connector: Power Consumption: Standard Model AC Power Pack: Dimensions (approx): Weight (approx): Housing: Operating Temp: Storage Temp:

• High Brightness/Long Life TFT panel

• VGA ( 640 x 480 pixels ) resolution

• Automatic Image Size Adjustment

• Rugged Chassis Ready for rear mounting to panels

• Adjustable fixing brackets

• Touchscreens easily integrated

• Provision for remote OSD controls

• A No Frills Industrial Design Concept

The 29LS101(61MP) Series of LCD monitor heads has been designed for industrial applications that require a compact VGA compatible monitor with good viewability. It is constructed from painted Aluminium, making it light in weight with good rigidity. Adjustable fixing brackets allow easy mounting of the chassis to a front panel.

The 29LS101(61MP) Series incorporates PAL/NTSC capability in addition to RGB, opening applications in security, surveillance and machine vision systems. Power & Signal connectors exit vertically downwards allowing the installer to take full advantage of the monitor’s 40mm depth. The 61MP series has been designed as a cost-effective alternative to our 51UN series 10.4" display that is designed specifically for Legacy Signals up to VGA resolution.

AM Colour TFT 256k 640 x 480 pixels 211.2 x 158.4 mm None Dual Edge CFL x 2 50,000 hours typical 380 cd/m2 typical 500:1 120°H , 100° V Analog RGB 0.7-1.0Vp-p 15-pin HD Female

Separate H&V (+/-ve) TTL

PAL or NTSC standard RCA Composite (CVBS) 1Vp-p 640 x 480 VGA 15kHz (PAL) - 38kHz 50 - 70Hz None

(At rear) Autosetup + full OSD menu via pushbuttons

External AC/DC Power Pack 110/230Vac 50/60Hz 12.0Vdc at 0.8 A approx. 2.1mm 20W typical 263.4 x 225.7 x 44.4 mm 1.5 kg.

Painted Alum. (Storm Grey)

00 to 500 C -200 to 600 C

29LS101E61MP 31PR0072-12/1

(11)

29LS101(61MP) SERIES 10.4" LCD CHASSIS MONITOR

82.5 82.5 49.2 49.2 9 7 .6 1 9 5 .2 2 1 5 .5 Active Area 211.2 x 158.4 44.4

6

0 .1

7

5 .0

Picture Controls 94.2 75.0 4xM4 Fixings on VESA Standard spacing. Touch Input* Power Input

Video Input (RCA) Y/C (S-VHS) Input VGA Input

*Where Fitted 263.4

(12)

FLAT PANEL MONITORS

29LS103(71UN) SERIES

10.4" LCD CHASSIS MONITORS

DISPLAY SIGNAL INPUTS POWER INPUTS PART NUMBERS Type: No. Colours: Max. Resolution: Active Display Area Display Protection Backlight: Backlight Life: Brightness: Contrast Ratio: Viewing Angles: Video: Input Connectors: Sync. Type/Level: Multiscan Support: Horizontal Scan: Vertical Scan: Clock Rate: Controls:

(On Screen Display buttons at rear) AC Model: DC Model: Connector: Power Consumption: Standard Model AC Power Pack: Dimensions (approx): Weight (approx): Housing: Operating Temp: Storage Temp:

• High Brightness/Long Life TFT panel

• 15 to 60kHz Horizontal Scanning range

• 40 to 100Hz Vertical Scanning range

• Programmable for non-standard Legacy signals

• Optional Touchscreen Integrated

• Universal Inputs via BNC /15HD connectors

• Rugged Chassis Ready for rear mounting to panels

The 29LS103(71UN) Series of LCD chassis monitors has been designed for industrial applications in the Control field and other users that require a compact VGA monitor with a small footprint and a high brightness display with good viewing angles. The rugged, metal construction of the monitor ensures exceptional stability, especially important when touchscreen operation is necessary. Adjustable top and bottom fixing brackets allow easy mounting of the chassis to a front panel. The KME A/D board has been designed to accept a wide range of signal timings from 15kHz up to VGA standard, including CGA & EGA legacy signals. Set-up controls for fine tuning of the display are located at the rear of the monitor. Once set, no further adjustments should be required, and the last setting is stored in memory. AM Colour TFT 256k 800 x 600 pixels 211.2 x 158.4 mm Toughened Glass Dual Edge CFL x 2 50,000 hours typical 400cd/m2 _typical 500:1 typical 120°H, 100°V Analog RGB 0.7V p-p OR TTL RGB >2.75Vp-p (via special TTL accessory cable) 5 x BNC 75Ω

15-pin HD Female

Separate H&V (+/-ve) TTL or Composite (-ve) TTL or Sync-on-Green (-ve) 0.3V 800 x 600 SVGA 640 x 480 VGA + pre-programmed timings in 15-30kHz range 15 – 60kHz 40 – 100Hz 80MHz max. Brightness, Contrast, H/V Position & Size, Frequency, Frequency Fine

External AC/DC Power Pack 110/230Vac 50/60Hz 12.0Vdc 3-pin Circular 30W max. 258 x 195 x 70mm 2 kg.

00_{to 50}0 _C

-200_{to 60}0 _C

29LS103E71UN (12Vdc) 20BK0220/1

SVGA and Old Legacy signals

Fixing Brackets Not Shown

(13)

29LS103(71UN) SERIES 10.4" LCD CHASSIS MONITOR

195.5 258.2 1 9 9 .5 2 1 3 .3 2 1 4 .3 2 1 7 .6 2 2 7 .5 40.0 46.5 46.5 40.0 82.5 82.5

M4 Fixing Holes,14 off 70.0 FRONT VIEW SIDE VIEW

BOTTOM VIEW

REAR VIEW All dimensions in millimetres (Not to scale) Where Fitted* D is p la y C e n tr e 9 9 .8

(14)

FLAT PANEL MONITORS

29LS121(61MP) SERIES

12.1" LCD CHASSIS MONITORS

DISPLAY SIGNAL INPUTS POWER INPUTS PART NUMBERS Type: No. Colours: Max. Resolution: Active Display Area: Display Protection: Backlight: Backlight Life: Brightness: Contrast Ratio: Viewing Angles: Input A: RGB: Input Connector: Sync. Type/Level: Input B: Video: Input Connector: Sync. Type/Level: Multiscan Support: Horizontal Scan: Vertical Scan: User Controls: Set Up Controls: AC Model: DC Model: Connector: Power Consumption: Standard Model AC Power Pack: Dimensions (approx): Weight (approx): Housing: Operating Temp: Storage Temp:

• High Brightness/Long Life TFT panel

• SVGA ( 800 x 600 pixels ) resolution

• Automatic Image Size Adjustment

• Rugged Chassis ready for rear mounting to panels

• Adjustable Top and bottom Fixing Brackets

• Touchscreens easily integrated

• Provision for remote OSD controls

• A No Frills Industrial Design Concept

The 29LS121(61MP) Series of LCD chassis monitors has been designed for industrial applications that require a compact VGA/SVGA compatible monitor with good viewability. It is constructed from painted Aluminium, making it lightweight with good rigidity. Adjustable top and bottom fixing brackets allow easy mounting of the chassis to a front panel.

The 29LS121(61MP) Series incorporates PAL/NTSC capability in addition to RGB, opening applications in security, surveillance and machine vision systems. Power & Signal connectors exit vertically downwards allowing the installer to take full advantage of the monitor’s 47mm depth. The 61MP series has been designed as a cost-effective alternative to our 51UN series 12.1" display that is designed specifically for Legacy Signals up to SVGA resolution.

AM Colour TFT 256k 800 x 600 pixels 246 x 184.5 mm None Dual Edge CFL x 2 50,000 hours typical 350 cd/m2 typical 350:1 120°H , 90°V Analog RGB 0.7-1.0Vp-p 15-pin HD Female

PAL or NTSC standard RCA Composite (CVBS) 1Vp-p 800 x 600 SVGA 640 x 480 VGA 15kHz (PAL) - 38kHz 50 - 70Hz None

External AC/DC Power Pack 110/230Vac 50/60Hz 12.0Vdc 2.1mm 20W typical 291 x 261 x 53 mm 1.7 kg.

00 to 500 C -200 to 600 C

29LS121E61MP/1 31PR0072-12/1

(15)

29LS121(61MP) SERIES 12.1" TFT CHASSIS MONITOR

246.0 (Active Area) 291 1 8 4 .5 ( A cti v e A re a ) 2 3 4 .4 VGA Input Touch/Remote* Video Input/

RCA Connector Power Input _{Power Input*}

52.6 23.0 1 1 7 .2 ( C tr ) Picture Controls

All dimensions in millimetres (Not to scale) *Where fitted 2 4 8 .8 ( C tr s ) M4 Fixing Holes 2 6 0 .8 66.0 256.0 206.0

(16)

FLAT PANEL MONITORS

29LS123(51UN) SERIES

12.1" LCD CHASSIS MONITORS

DISPLAY SIGNAL INPUTS POWER INPUTS AM Colour TFT 256k 800 x 600 pixels 246 x 184.5 mm Dual Edge CFL x 2 50,000 hours typical 350cd/m2 350:1 typical 120°H, 90°V 294 x 265 x 55mm 3.0kg. approx. 0 to 500 C -20 to 600 C

•

Minimum Width (12" CRT Monitor dimensions)

•

CGA/EGA/VGA/SVGA compatible

• Analogue + TTL Video inputs via BNC/9D/15HD

• Programmable for non-standard Legacy signals

• 12Vdc Operation (110/230Vac & 24Vdc options)

• EMC Shielded for CE requirements

•

Optional Touchscreen Integration

• Top & Bottom Fixing Brackets

The 29LS123UN series of Industrial LCD monitors have been designed as replacements for 12" CRT monitors now that supplies of 12" CRTs are difficult to obtain. Ease of

integration into a wide range of Measurement, Instrumentation and Human-Machine interface applications has been a key consideration.

KME has designed a rugged LCD monitor module, of minimum width, to match the dimensions of its 12" CRT monitor chassis. The monitor is housed in a rugged metal case with rear fixing points. The LCD module is ventilated for best reliability when enclosed within the OEM enclosure. EMC considerations include the use of a metal shield over the front of the LCD panel.

The A/D board has been designed to accept a wide range of signal timings from 15kHz up to SVGA standard, including CGA & EGA legacy signals. Set-up controls for fine-tuning of the display are located at the rear of the monitor. Once set, no further adjustments should be required, and the last setting is stored in memory. Standard Model: AC Power Pack: 29LS123E51UN/1 20BK0220/1 Type: No. Colours: Max. Resolution: Active Display Area Backlight: Backlight Life: Brightness: Contrast Ratio: Viewing Angles: Dimensions (approx): Weight (approx): Operating Temp: Storage Temp:

SVGA & Old Legacy Signals

Video: Input Connectors: Sync. Type/Level: Multiscan Support: Horizontal Scan: Vertical Scan: Clock Rate: Controls:

(On Screen Display buttons at rear)

Analog RGB 0.7V p-p TTL RGB >2.75Vp-p 6 x BNC 75R 15-pin HD Female

Separate H&V (+/-ve) TTL or Composite (-ve) TTL or Sync-on-Green (-ve) 0.3V 800 x 600 SVGA 640 x 480 VGA 640 x 400 640 x 350

& other pre-programmed timings in 15-30kHz range 15 – 60kHz

40 – 100Hz 80MHz max. Brightness, Contrast, H/V Position & Size, Frequency, Frequency Fine,

Colour DC Model: Power Consumption: 12Vdc (15-30Vdc option) 30W Max. PART NUMBERS

(17)

29LS123(51UN) SERIES 12.1" TFT MONITOR

29ls123(51un)2 08/2004 294.0 2 3 7 .8 2 5 .7 1 8 6 .0 A c ti v e A re a 23.0 247.5 Active Area 2 1 1 .8 272.0 11.0 1 3 .0 FRONT VIEW SIDE VIEW BOTTOM VIEW REAR VIEW

All dimensions in millimetres (Not to scale) 5 5 .0 1 0 .0 2 5 2 .2 44.8 68.6 67.1 68.6 2 6 4 .2 13.7 (typ) 28.1 237.8

(18)

FLAT PANEL MONITORS

29LS123(71UN) SERIES

12.1" LCD CHASSIS MONITORS

DISPLAY SIGNAL INPUTS POWER INPUTS AM Colour TFT 256k 800 x 600 pixels 246 x 184.5 mm Dual Edge CFL x 2 50,000 hours typical 400cd/m2 500:1 typical 140°H, 110°V 294 x 265 x 55mm 3.0kg. approx. -10 to 550 C -30 to 700 C

•

Minimum Width (12" CRT Monitor dimensions)

•

CGA/EGA/VGA/SVGA compatible

• Analogue Video inputs via BNC/15HD

• TTL Inputs via 9D – 15D Accessory Cable

• Pre-Programmed for non-standard Legacy signals

• 12Vdc Operation (110/230Vac & 24Vdc options)

• Top & Bottom Fixing Brackets

The 29LS123UN series of Industrial LCD monitors have been designed as replacements for 12" CRT monitors now that supplies of 12" CRTs are difficult to obtain. Ease of

integration into a wide range of Measurement, Instrumentation and Human-Machine interface applications has been a key consideration.

KME has designed a rugged LCD monitor module, of minimum width, to match the dimensions of its 12" CRT monitor chassis. The monitor is housed in a rugged metal case with rear fixing points. The LCD module is ventilated for best reliability when enclosed within the OEM enclosure. E3MC considerations include the use of a metal shield over the front of the LCD panel.

The A/D board has been designed to accept a wide range of signal timings from 15kHz up to SVGA standard, including CGA & EGA legacy signals. Set-up controls for fine-tuning of the display are located at the rear of the monitor. Once set, no further adjustments should be required, and the last setting is stored in memory. Standard Model: AC Power Pack: 29LS123E71UN 20BK0220/1 Type: No. Colours: Max. Resolution: Active Display Area Backlight: Backlight Life: Brightness: Contrast Ratio: Viewing Angles: Dimensions (approx): Weight (approx): Operating Temp: Storage Temp:

SVGA & Old Legacy Signals

Video: Input Connectors: Sync. Type/Level: Multiscan Support: Horizontal Scan: Vertical Scan: Clock Rate: Controls:

(On Screen Display buttons at rear)

Analog RGB 0.7V p-p OR TTL RGB >2.75Vp-p (via special TTL accessory cable) 6 x BNC 75R

15-pin HD Female

Separate H&V (+/-ve) TTL or Composite (-ve) TTL or Sync-on-Green (-ve) 0.3V 800 x 600 SVGA 640 x 480 VGA 640 x 400 640 x 350

& other pre-programmed timings in 15-30kHz range 15 – 60kHz

40 – 100Hz 80MHz max. Brightness, Contrast, H/V Position & Size, Frequency, Frequency Fine,

DC Model:

Power Consumption:

12Vdc (15-30Vdc option) 30W Max.

PART NUMBERS

(19)

29LS123(71UN) SERIES 12.1" LCD CHASSIS MONITOR

Touch Screen* Remote*

55.0 D is p la y C e n tr e 1 1 8 .9 294.0 2 3 7 .8

Where Fitted* 67.1

12 Holes on a 13.72mm pitch spacing

68.6 68.6 2 5 2 .2 2 6 4 .2 237.8 246.0x184.5mm Active Area=

(20)

MONITORES PLANOS

KME

Displays

PANTALLA AM Colour TFT 16 millones 1024 x 768 pixels 304 x 228 mm 50,000 horas típico 250cd/m²típico 450:1 típico 130o H, 110o V Tipo: Nº. Colores: Max. Resolución: Area activa: Backlight Life: Brillo: Relación contraste: Angulo de Visión NÚMERO DE PIEZA ENTRADA DE TENSIÓN 12Vdc o 15-30Vdc 3 pin Circular 35W Max. ENTORNO Y AMBIENTE 388 x 336 x 58 mm 5.0 Kg.

Painted Steel (Storm Grey) 0 a 50°C -20 a 60°C Dimensiones (approx): Peso(approx): Caja Temp. operación: Temp. alamcen Modelo Estandar Modelo DC Alimentador AC Power Pack 29LS151E71UN (12Vdc) 29LS151D71UN (24Vdc) 20BK0220/1 DC Model: Conector: Consumo: Señal RGB : Conectores entrada: Tipo de Sync/level:

Soporte para barrido rápido: Barrido Horizontal: Barrido vertical: Controles: (Botones en el frente y OSD ) Analógico RGB 0.7-1.0Vp-p OR TTL RGB >2.75Vp-p

15D (cable adaptador para BNC o 9D )

Separados H&V (+/-ve) TTL o Compuesto (-ve) TTL o Sync-on-Green (-ve) 0.3V 1024 x 768 XGA 800 x 600 SVGA 640 x 480 VGA + preprogramados en el rango 15-30kHz 15-60kHz 40-100Hz

Brillo, Contraste, H/V Posición &Tamaño, Frecuencia,

Frecuencia Fina

• Especialmente diseñado para barridos lentos

• CGA, EGA y todos los estándares VESA hasta XGA

• Ajustes de imagen almacenables.

• Acepta señales TTL, Analógico & Entrelazado

• Cables adicionales para entradas BNC & 9D

• Soportes de montaje versatiles.

• Tambien versiones de Rack, Panel, Sobremesa y Cabeza

La serie de monitores TFT 29LS151(51UN) de 15.0" han sido desarrollados principalmente para aplicaciones de barrido lento como reemplazo de monitores antiguos. Utilizan un moderno panel XGA TFT (1024 x 768 pixels) y una placa AD diseñada por KME. Todos los elementos han sido montados en una compacta caja metálica

(Dimensiones compatibles con sistemas anteriores de 15”). Soportes ajustables superiores e inferiores facilitan un montaje fácil en un panel frontal.

KME ha creado un sistema MultiScan universal que puede reconocer automáticamente cualquier modo, y que hace uso de una librería de mas de 25 años de experiencia en fabricación de monitores. Este monitor tiene una capacidad única de reconocer señales entre 15Khz hasta 60Khz. Algunos modos están preprogramados en el dispositivo, otros pueden ser identificados automáticamente y almacenados para el futuro. Puede ser necesario un pequeño ajuste para optimizar la observación.

ENTRADAS DE SEÑAL

SERIE 29LS151(51UN)

MONITOR TFT EN CHASIS DE BARRIDO LENTO 15.0"

H. kHz V. Hz Pixels H. kHz V. Hz Pixels 15.625 50 714 * 288 15.63 50 560 * 275 15.63 60 808 * 238 15.72 60 564 * 240 15.72 60 508 * 240 15.72 60 604 * 240 15.72 60 640 * 200 16.10 50 564 * 304 16.276 70 640 * 220 16.79 70 577 * 215 17.85 50 508 * 338 21.83 60 640 * 350 20.65 50 640 * 384 24.78 60 640 * 384

Soportes de fijación no mostrados

XGA Y SEÑALES ANTIGUAS

(21)

122.0 294.0 2 9 5 .9 3 1 6 .7 C tr s M4 Fixing Holes

(22)

FLAT PANEL MONITORS

DISPLAY AM Colour TFT 256k 1024 x 768 pixels 304 x 228mm 50,000 hours typical 230cd/m² typical 400:1 typical 160o H , 160o V Type: No. Colours: Max. Resolution: Active Display Area: Backlight Life: Brightness: Contrast Ratio: Viewing Angles: PART NUMBERS POWER INPUTS 12.0Vdc or 15-30Vdc 3 pin DIN 110/230Vac 50/60Hz via separate PowerPack 30W Max.

388 x 336 x 57mm 3 Kg

Aluminium (Storm Grey)

0 to 50°C -20 to 60°C Dimensions (approx): Weight (approx): Housing: Operating Temp: Storage Temp: 12V dc model: 15-30Vdc model: 12V dc model with Resistive Touch: AC Power Pack

:

29LS151E61MP/4 29LS151D61MP/4 29LS151ER61MP/4 20BK0220/1 DC Model: Connector: AC Model: Power Consumption:

• Form, Fit & Function compatible with older

KME chassis designs

• Versatile Panel Mounting Brackets

• High Brightness & Wide Viewing Angles

• Automatic Image Size Adjustment

• On-Screen Display controls at rear

• Vibration-proof Locking Connector for power

• Touchscreen (option) fits flush to front edge

• Also available in Desktop, Head, Rack &

Panelmount formats

The 29LS151(61MP) Series of LCD chassis monitors has been designed for industrial applications that require a compact VGA/XGA compatible monitor with good

viewability. It is constructed from painted Aluminium, making it lightweight with good rigidity. Adjustable top and bottom fixing brackets allow easy mounting of the chassis to a front panel.

The 29LS151(61MP) Series incorporates PAL/NTSC capability in addition to RGB, opening applications in security, surveillance and machine vision systems. Power & Signal connectors exit vertically downwards allowing the installer to take full advantage of the monitor’s 57 mm depth. The 61MP series has been designed as a cost-effective alternative to our 51UN series 15.0" display that is designed specifically for Legacy Signals up to XGA resolution. SIGNAL INPUTS

29LS151(61MP) SERIES

15.0" LCD CHASSIS MONITORS

Input A: RGB: Input Connector: Sync. Type/Level: Input B: Video: Input Connector: Sync. Type/Level: Multiscan Support: Horizontal Scan: Vertical Scan: User Controls: Set Up Controls: Analog RGB 0.7-1.0Vp-p 15-pin HD Female

PAL or NTSC standard RCA Composite (CVBS) 1Vp-p 1024 x 768 XGA 800 x 600 SVGA 640 x 480 VGA 15kHz (PAL) - 60kHz 60Hz None

(23)

MONITORES PLANOS

KME

Displays

PANTALLA AM Colour TFT 16 millones 1024 x 768 pixels 304 x 228 mm 50,000 horas típico 250cd/m²típico 450:1 típico 130o H, 110o V Tipo: Nº. Colores: Max. Resolución: Area activa: Backlight Life: Brillo: Relación contraste: Angulo de Visión NÚMERO DE PIEZA ENTRADA DE TENSIÓN 12Vdc o 15-30Vdc 3 pin Circular 35W Max. ENTORNO Y AMBIENTE 388 x 336 x 58 mm 5.0 Kg.

Painted Steel (Storm Grey) 0 a 50°C -20 a 60°C Dimensiones (approx): Peso(approx): Caja Temp. operación: Temp. alamcen Modelo Estandar Modelo DC Alimentador AC Power Pack 29LS151E71UN (12Vdc) 29LS151D71UN (24Vdc) 20BK0220/1 DC Model: Conector: Consumo: Señal RGB : Conectores entrada: Tipo de Sync/level:

Soporte para barrido rápido: Barrido Horizontal: Barrido vertical: Controles: (Botones en el frente y OSD ) Analógico RGB 0.7-1.0Vp-p OR TTL RGB >2.75Vp-p

15D (cable adaptador para BNC o 9D )

Separados H&V (+/-ve) TTL o Compuesto (-ve) TTL o Sync-on-Green (-ve) 0.3V 1024 x 768 XGA 800 x 600 SVGA 640 x 480 VGA + preprogramados en el rango 15-30kHz 15-60kHz 40-100Hz

Brillo, Contraste, H/V Posición &Tamaño, Frecuencia,

Frecuencia Fina

• Especialmente diseñado para barridos lentos

• CGA, EGA y todos los estándares VESA hasta XGA

• Ajustes de imagen almacenables.

• Acepta señales TTL, Analógico & Entrelazado

• Cables adicionales para entradas BNC & 9D

• Soportes de montaje versatiles.

• Tambien versions de Rack, Panel, Sobremesa y Cabeza

La serie de monitores TFT 29LS151(71UN) de 15.0" han sido desarrollados principalmente para aplicaciones de barrido lento como reemplazo de monitores antiguos. Utilizan un moderno panel XGA TFT (1024 x 768 pixels) y una placa AD diseñada por KME. Todos los elementos han sido montados en una compacta caja metálica (

Dimensiones compatibles con sistemas anteriores de 15,1”). Soportes ajustables superiores e inferiores facilitan un montaje fácil en un panel frontal.

KME ha creado un sistema MultiScan universal que puede reconocer automáticamente cualquier modo, y que hace uso de una librería de mas de 25 años de experiencia en fabricación de monitores. Este monitor tiene una capacidad única de reconocer señales entre 15Khz hasta 60Khz. Algunos modos están preprogramados en el dispositivo, otros pueden ser identificados automáticamente y almacenados para el futuro. Puede ser necesario un pequeño ajuste para optimizar la observación..

ENTRADAS DE SEÑAL

SERIE 29LS151(71UN)

MONITOR TFT EN CHASIS DE BARRIDO LENTO 15.0"

Soportes de fijación no mostrados

(24)

3 1 6 .7 C tr s 2 9 5 .9 M4 Fixing Holes 33.7 Active Area = 304.1x228.1mm 1 5 8 .4 D is p la y C e n tr e 122.0 294.0

(25)

FLAT PANEL MONITORS

DISPLAY

a-Si TFT Active Matrix 16.2 million 1280 x 1024 pixels 337.9 x 270.3mm CCFL x 6 280cd/m² typical 1000:1 typical. 178o H, 178o V Type: No. Colours: Max. Resolution: Active Display Area: Backlight:

Brightness: Contrast Ratio: Viewing Angles:

110/230V 50/60Hz via integral power supply. 3 pin IEC

55W Max.

404 x 370 x 56mm 5kg.

Aluminium (Storm Grey ) 0 to 50°C -20 to 60°C Dimensions (approx): Weight (approx): Housing: Operating Temp

:

Storage Temp: RGB + PAL/NTSC 12Vdc Version 29LS171A61MP/3 29LS171E61MP/3 AC Model: Connector: Power Consumption

:

A) RGB Signal Input Connectors: Sync. Type/Level: B) DVI Signal: C) Video Resolutions: Horizontal Scan: Vertical Scan: Controls:

(On Screen Display ) buttons at rear )

Analog 0.7Vp-p 15-pin HD Female

Separate H&V (+/-ve) TTL Composite (+/-ve) TTL Sync-on-green –0.3Vp-p

DVI-D standard 24 pin PAL/NTSC – RCA connector 1280 x 1024 SXGA 1024 x 768 XGA 800 x 600 SVGA 640 x 480 VGA 15kHz (PAL) & 25 - 80kHz 56 - 75Hz

Power switch, Auto Set-up, Brightness, Contrast, Input select Menu.

• Industrial Chassis with Mounting Brackets

• Lightweight Metal Construction

• High Brightness & Wide Viewing Angles

• Automatic Image Size Adjustment

• Triple Inputs (RGB, DVI-D & PAL)

• Integral AC power supply (12Vdc option)

• Touchscreen models available

• Also available in Desktop, Head, Rack &

Panelmount formats

KME has developed this display module for industrial applications where an economically priced SXGA TFT flat panel monitor is required with a bright screen and wide viewing angles. The unit is constructed from painted aluminium and incorporates triple data input including

PAL/NTSC, enabling applications in security surveillance and machine vision to be addressed.

Automatic mode detection and picture scaling circuitry allow the display of resolutions lower than the 1280 x 1024 pixels native resolution.

The 29LS171(61MP) series is supplied with removable top and bottom fixing brackets and tapped M3 holes are available on both sides of the aluminium housing. The adjustable fixing brackets allow easy mounting of the chassis to a front panel. VESA fixings for Ergo Arm mounting are incorporated as standard and a range of Arm solutions is available from stock. SIGNAL INPUTS

29LS171(61MP)

SERIES

17.0" LCD MONITOR CHASSIS

POWER

PART NUMBERS

(26)

All dimensions in millimetres (Not to scale) 3 3 4 .1 201.9(Ctr) 403.9 1 7 1 .0 (C tr ) Active Area 337.9 x 270.3 32.5 56.3 7 3 .8 2 9 9 .9 Power Input 15 D Input DVI Input Picture Controls 109.8 335.0 Input PAL 3 6 9 .7 3 5 3 .4 , M 5 C le a r. 3 5 6 .1 , M 4 C le a r. 122.0 294.0 329.5 386.0

(27)

FLAT PANEL MONITORS

KME Displays

PAL/NTSC and SXGA Models

DISPLAY AM Colour TFT 16 million 1280 x 1024 pixels 376 x 301 mm 50,000 hours typical 250cd/m²typical 1000:1 typical 89o Left; 89o Right 89o Up; 89o Down 10ms average, typical Type: No. Colours: Max. Resolution: Active Display Area: Backlight Life: Brightness: Contrast Ratio: Viewing Angles: Response Time: POWER INPUTS 12.0V 50W Max. PHYSICAL/ENVIRONMENTAL 430 x 396 x 73.4mm 9Kg.

Painted Steel (Storm Grey) 0 to 50°C -20 to 60°C Dimensions (approx): Weight (approx): Housing: Operating Temp: Storage Temp: Standard (DC) Model: AC Power Pack: Panelmount : 29LS1901E31MP/2 20BK0234H 29LP1901A31MP/2 DC Model: Power Consumption: Input A: Video: Input Connector: Sync. Type/Level: Input B: Video Input Connector: Sync. Type/Level: Multiscan Support: Horizontal Scan: Vertical Scan: Clock Rate: Controls:

(On Screen Display ) buttons at rear ) PAL or NTSC standard BNC (75R) Composite (CVBS) 1V p-p Analog RGB 0.7-1.0V p-p 15-pin HD Female

Separate H&V (+/-ve) TTL or Composite (-ve) TTL or Sync-on-Green (-ve) 0.3V 1280 x 1024 SXGA 1024 x 768 XGA 800 x 600 SVGA 640 x 480 VGA 15kHz (PAL) - 91kHz 56-85Hz 135MHz max

Brightness, Contrast, Autoset, H/V Position, Colour, Clock, Clock Phase and Priority.

• Rugged Metal Construction with Good Rigidity

• Adjustable fixing brackets for easy integration

• High Brightness & Wide Viewing Angles

• Deep Dimming 100% to 0%

• Range of Video Signal Features

• Optional RS232 control of OSD

• Optional Touchscreen integration

• Superior quality PAL/NTSC

• Also Panel/Rackmount, Heads & Desktop versions

KME has developed this 19.0" Chassis model, within the popular 29LS series of LCD monitors, to address the growing demand from system builders for a monitor that is capable of displaying PAL/NTSC video and SXGA to VGA resolution data signals.

The 29LS1901(31MP) series has this capability. Two separate signal sources (e.g.Camera/VCR + Computer RGB) can be connected simultaneously and automatically switched full screen, on a Priority basis. Alternatively the video images may be presented as a “Picture in Picture” over a data image. This selection is set-up by the sophisticated OSD controls that also validate the picture zoom, flip, rotate and freeze frame features. Remote access to the OSD controls is also available via the RS232 serial port.

SIGNAL INPUTS

29LS1901(31MP) SERIES

19.0" LCD CHASSIS MONITORS

(28)

29LS1901 SERIES 19.0" LCD CHASSIS MONITOR

3 6 0 .0 430.0

Active Area = 376.3x301.0mm

3 9 5 .6 3 7 9 .3 M 5 f ix in g c e n tr e s 386.0 3 8 2 .0 M 4 f ixin g c e n tr e s 50.3 109.8 109.8 109.8 68.0 86.0 122.0 86.0 22.0 3 3 .0

449.6 M4 & M5 fixing centres

8 0 .0 1 0 3 .8 1 5 2 .4 M 5 f ix in g c e n tr e s 2 0 0 .0 M 4 f ixin g c e n tr e s 40.0

Top & Bottom Brackets

Side Brackets

73.4 465.6

(29)

FLAT PANEL MONITORS

KME Displays

SXGA and Old Legacy Signals

DISPLAY AM Colour TFT 16 million 1280 x 1024 pixels 376 x 301 mm 50,000 hours typical 250cd/m²typical 500:1 typical 85o Left; 85o Right 85o Up; 85o Down 15ms average, typical Type: No. Colours: Max. Resolution: Active Display Area: Backlight Life: Brightness: Contrast Ratio: Viewing Angles: Response Time: POWER INPUTS 12.0V 50W Max. PHYSICAL/ENVIRONMENTAL 430 x 396 x 73.4mm 9Kg.

Painted Steel (Storm Grey) 0 to 50°C -20 to 60°C Dimensions (approx): Weight (approx): Housing: Operating Temp: Storage Temp: Standard Model: Side Bracket model: AC Power Pack 29LS1901E51UN/2 29LS1901UN001/2 20BK0234H DC Model: Power Consumption:

Due to a policy of continuous product development KME reserves the right to change specifications and descriptions without prior notification. All trade marks acknowledged. 29ls1901(51un2)1 10/2005 RGB Signal : Input Connectors: Sync. Type/Level:

Slow Scan Support: (see table examples) Fast Scan Support:

Horizontal Scan: Vertical Scan: Clock Rate: Controls:

Analog RGB 0.7-1.0Vp-p Or TTL >2.75Vp-p 9D, 15D, BNC x 5

Separate H&V (+/-ve) TTL or Composite (-ve) TTL or Sync-on-Green (-ve) 0.3V Pre-programmed Analog or TTL inputs in 15-40kHz range 1280 x 1024 SXGA 1024 x 768 XGA 800 x 600 SVGA 640 x 480 VGA 15-80kHz 40-80Hz 135MHz max

Brightness, Contrast, Auto set-up Disable, H/V Position, Clock, Clock Phase and Priority

• Specially designed for Slow Scan Signals

• CGA, EGA and all VESA standards up to SXGA

• Deep Dimming Inverter – 100% to 0% brightness

• TTL, Analog & Interlaced Signals accepted

• BNC, 9-D & 15-D Connectors

• Rugged Metal Construction with Good Stability

• Also Rack/Panelmount, Heads & Desktop versions

The 29LS1901(51UN) Series of 19.0" LCD monitors has been designed primarily for Slow Scan Legacy Systems as replacements for 20"/21" CRT monitors. They utilize a modern SXGA TFT (1280 x 1024 pixels) panel and a KME-designed Analog-Digital interface board. All elements, including mounting brackets have been

packaged in a compact metal chassis that is ready for integration into a panel or enclosure. All controls are located at the rear.

By special development of their own Signal Recognition and Scaling software, and access to an extensive library of older signal timings gained from 25+ years of CRT monitor manufacturing, KME has created a Multiscan (“Universal”) flat panel monitor with unique 15kHz to 80kHz display capabilities. Some common Slow Scan Signal timings are factory pre-set. New ones may be added on request. Other signals, which are close to those listed, will give a display but some adjustment may be necessary for full screen performance. The final settings can be easily stored for future use.

SIGNAL INPUTS

29LS1901(51UN) SERIES

19.0" SLOW SCAN LCD CHASSIS MONITORS

H. kHz V. Hz Pixels H. kHz V. Hz Pixels 15.625 50 714 * 288 15.63 50 560 * 275 15.63 60 808 * 238 15.72 60 564 * 240 15.72 60 508 * 240 15.72 60 604 * 240 15.72 60 640 * 200 16.10 50 564 * 304 16.276 70 640 * 220 16.79 70 577 * 215 17.85 50 508 * 338 21.83 60 640 * 350 20.65 50 640 * 384 24.78 60 640 * 384 PART NUMBERS

(30)

29LS1901 SERIES 19.0" LCD CHASSIS MONITOR

3 6 0 .0 430.0

Active Area = 376.3x301.0mm

3 9 5 .6 3 7 9 .3 M 5 f ix in g c e n tr e s 386.0 3 8 2 .0 M 4 f ixin g c e n tr e s 50.3 109.8 109.8 109.8 68.0 86.0 122.0 86.0 22.0 3 3 .0

449.6 M4 & M5 fixing centres

8 0 .0 1 0 3 .8 1 5 2 .4 M 5 f ix in g c e n tr e s 2 0 0 .0 M 4 f ixin g c e n tr e s 40.0

Top & Bottom Brackets

Side Brackets

73.4 465.6

(31)

FLAT PANEL MONITORS

ME

Displays

DISPLAY AM Colour TFT 16 million 1366 x 768 pixels 575.7 x 323.7 mm 50,000 hours typical 500cd/m²typical 800:1 typical 85o Left; 85o Right 85o Up; 85o Down 15ms average, typical Type: No. Colours: Max. Resolution: Active Display Area: Backlight Life: Brightness: Contrast Ratio: Viewing Angles: Response Time: PART NUMBERS POWER INPUTS 90-264V 50/60Hz 90W Max. PHYSICAL/ENVIRONMENTAL 636 x 471 x 111mm 15Kg. Painted Aluminium 0 to 50°C -20 to 60°C Dimensions (approx): Weight (approx): Housing: Operating Temp: Storage Temp: Chassis model Head model 29LS261A51UN 29LM261A51UN AC Model: Power Consumption:

Due to a policy of continuous product development KME reserves the right to change specifications and descriptions without prior notification. All trade marks acknowledged. 29ls261(51un)1 11/2004 RGB Signal : Input Connectors: Sync. Type/Level:

Slow Scan Support: (see table examples) Fast Scan Support:

Horizontal Scan: Vertical Scan: Clock Rate: Controls:

Analog RGB 0.7-1.0Vp-p Or TTL >2.75Vp-p 9D, 15D, BNC x 5

Separate H&V (+/-ve) TTL or Composite (-ve) TTL or Sync-on-Green (-ve) 0.3V Pre-programmed Analog or TTL inputs in 15-40kHz range 1366 x 768 WXGA 1280 x 1024 SXGA 1024 x 768 XGA 800 x 600 SVGA 640 x 480 VGA 15-91kHz 40-80Hz 135MHz max

Brightness, Contrast, Auto set-up Disable, H/V Position, Clock, Clock Phase and Priority

• Specially designed for Legacy CRT replacement

• Widescreen (16:9) formats up to WXGA resolution

• High Brightness and Wide Viewing Angles

• TTL, Analog & Interlaced Signals accepted

• BNC, 9-D & 15-D Connectors

• Rugged Metal Construction with Good Stability

• Head Model (without Fixing Brackets) available

The 29LS261(51UN) Series of 26" LCD monitors has been designed primarily for Slow Scan Legacy Systems as replacements for 28" CRT monitors. They utilise modern WXGA TFT panels and a KME designed Analog-Digital interface board. All elements, including a toughened glass protection screen, have been packaged in a rugged metal housing. The AC power supply is integrated in the monitor head.

Public Information and Process Control systems may be able to use the full width of this 16:9 screen. If 4:3 aspect ratio information is displayed the picture will be the same size as on a 21.3" LCD monitor. High brightness and exceptional viewing angles make this 26" a unique solution to many CRT Replacement problems. Some common Slow Scan Signal timings are factory pre-set. New ones may be added on request. Other signals, which are close to those listed, will give a display but some adjustment may be necessary for full screen performance. The settings can be stored for future use.

SIGNAL INPUTS

29LS261(51UN) SERIES

26.0" SLOW SCAN LCD CHASSIS MONITORS

(32)

29LS261(51UN) SERIES 26" LCD CHASSIS MONITOR

575.7 (Active Area) 32 3 .7 ( A c ti v e A re a ) 581.5 (Fixing Centres) 3 8 2 .8 635.8 4 50 .0 ( F ix in g C e n tr e s ) 605.4 4 7 0 .5 1 1 0 .5

Signal Input Area

Picture Controls 300.0 1 0 0 .0 Reversible Fixing Brackets Ø8.0

All Dimensions in Millimetres (Not to scale) FRONT VIEW REAR VIEW BOTTOM VIEW SIDE VIEW 1 9 1 .4 ( C tr )