• No se han encontrado resultados

Optimized carrier tracking loop design for real-time high-dynamics GNSS receivers

N/A
N/A
Protected

Academic year: 2017

Share "Optimized carrier tracking loop design for real-time high-dynamics GNSS receivers"

Copied!
19
0
0

Texto completo

Loading

Figure

Figure 1: Block diagram of classical PLL structure.
Figure 2: Block diagram of the typical FLL-assisted PLL structure.
Figure 4: Equivalence between UFA-PLL and FLL.
Figure 5: Type 3 loop noise equivalent bandwidth.
+7

Referencias

Documento similar

Supplementary Figure 4 | Maximum Likelihood Loliinae tree cladograms (combined plastome + nuclear 35S rDNA cistron) showing the relationships among the studied samples in each of

No obstante, como esta enfermedad afecta a cada persona de manera diferente, no todas las opciones de cuidado y tratamiento pueden ser apropiadas para cada individuo.. La forma

Vibration analysis of the time and frequency domains of the fruit detachment process could contribute to improving the design and management of this machinery, in

For the detection of smaller planets (an earth sized planet would cause a drop of 0.08%), whose transit signals with a S/N of <~ 1 are hidden in the noise,

The FMR spectrum of CoFe/CoNi (with hard external shell) biphase microwires present two peaks: one at high frequency corresponding to that of the core. The analysis of data

(hundreds of kHz). Resolution problems are directly related to the resulting accuracy of the computation, as it was seen in [18], so 32-bit floating point may not be appropriate

Results show that both HFP-based and fixed-point arithmetic achieve a simulation step around 10 ns for a full-bridge converter model.. A comparison regarding resolution and accuracy

This OISRR exhibits half the resonant frequency of the split ring resonator, allows a parallel connection with a coplanar waveguide (CPW) section and according to its frequency