• No se han encontrado resultados

Parallel processing applied to the design of concrete encased grounding electrodes

N/A
N/A
Protected

Academic year: 2017

Share "Parallel processing applied to the design of concrete encased grounding electrodes"

Copied!
11
0
0

Texto completo

Loading

Figure

Figure 1 :  Example of concrete encased grounding configuration
Figure 2 shows the flowchart with the basic steps for grounding design, which wasemployed in this work.
Table T1 - Performance parameters
Figure A - 1Basic grounding configuration

Referencias

Documento similar

Adequate resistance of the device to forces applied parallel to the longitudinal axis of the vehicle is required. This procedure will be discussed in detail in the paragraph.. of

The structure of this paper is as follows. In Section 2, we introduce basic aspects of mobile agent technology, which is important for this work. In Section 3, we describe and model

No obstante, como esta enfermedad afecta a cada persona de manera diferente, no todas las opciones de cuidado y tratamiento pueden ser apropiadas para cada individuo.. La forma

In this case using Design for manufacturing, the material and the manufacturing process used to make the product will be identified to simplify the design of

The next steps in this research line may be (1) to analyze the use of coarse RA in a precast-concrete plant considering, in addition to the aspects covered in this paper,

In that work, the main sources of errors are reported in order of decreasing importance as follows: (a) the differences in the number of words and signs for parallel sentences, due

This work describes the design and implementation of a new software framework, Scipion, that models image processing in electron microscopy allowing the integration of several

Abstract The absence of universally accepted solu- tions for the design of reinforcement in plates and shells in the structural concrete codes, and the constant development of