• No se han encontrado resultados

DISEÑO Y FABRICACIÓN DE UN SISTEMA HIDRÁULICO DE PRESIÓN CONSTANTE

N/A
N/A
Protected

Academic year: 2018

Share "DISEÑO Y FABRICACIÓN DE UN SISTEMA HIDRÁULICO DE PRESIÓN CONSTANTE"

Copied!
98
0
0

Texto completo

Loading

Figure

Figura 3. Diagrama de clasificación de los transductores. 4
Figura 4. Sensor Resistivo. 5
Tabla 1. Elementos y símbolos del contactor.
Tabla 5. Regla de sintonía Ziegler-Nichols basada en la respuesta escalón de la planta  (primer método) 17 Tipo de  controlador  Kp  Ti  Td  P
+7

Referencias

Documento similar

If certification of devices under the MDR has not been finalised before expiry of the Directive’s certificate, and where the device does not present an unacceptable risk to health

In addition to the requirements set out in Chapter VII MDR, also other MDR requirements should apply to ‘legacy devices’, provided that those requirements

The notified body that issued the AIMDD or MDD certificate may confirm in writing (after having reviewed manufacturer’s description of the (proposed) change) that the

que hasta que llegue el tiempo en que su regia planta ; | pise el hispano suelo... que hasta que el

Para ello, trabajaremos con una colección de cartas redactadas desde allí, impresa en Évora en 1598 y otros documentos jesuitas: el Sumario de las cosas de Japón (1583),

Tras establecer un programa de trabajo (en el que se fijaban pre- visiones para las reuniones que se pretendían celebrar los posteriores 10 de julio —actual papel de los

Products Management Services (PMS) - Implementation of International Organization for Standardization (ISO) standards for the identification of medicinal products (IDMP) in

This section provides guidance with examples on encoding medicinal product packaging information, together with the relationship between Pack Size, Package Item (container)