• No se han encontrado resultados

Analysis of the thermal treatment of plastic medical waste

N/A
N/A
Protected

Academic year: 2020

Share "Analysis of the thermal treatment of plastic medical waste"

Copied!
242
0
0

Texto completo

Loading

Referencias

Documento similar

In order to study in detail the evolution of fuel and oxidiser mass fractions, not only immediately after depressurisation, but also once pressure stability is reached, fuel

The expression ((having become common since the spring)) -the French original reads ((etant devenues populaires des le printems»- refers to the spring of 1708 and is

The Dwellers in the Garden of Allah 109... The Dwellers in the Garden of Allah

Penelitian ini bertujuan untuk mendapatkan asal daerah bahan baku yang terbaik untuk pembuatan sirup gula kelapa dan untuk mendapatkan konsentrasi arang aktif yang

The validation of the presented simplified model for estimating heat production by parabolic solar collectors was performed by comparing the heat determined from the Equa- tion

Comments: The command may be used to store positional or aperture offsets which have been found using the APOFF or OFFSET handset modes or input using the BEAMSWITCH, OFFSET

Four main groups of thermal energy flows interacting with the outside are identified; the outdoor air load, the active cooling input (cooling coils), the thermal load in the zone to

Mesophilic Anaerobic Co-Digestion of the Organic Fraction of Municipal Solid Waste with the Liquid Fraction from Hydrothermal Carbonization of Sewage Sludge.. Characterization