• No se han encontrado resultados

Towards Development of Laser Scribed Graphene Transducers for Electrochemical Biosensors

N/A
N/A
Protected

Academic year: 2020

Share "Towards Development of Laser Scribed Graphene Transducers for Electrochemical Biosensors"

Copied!
5
0
0

Texto completo

Loading

Figure

Fig. 1. Schematic diagram of fabrication process of reduced graphene  transducers by laser treatment
Fig. 3.  SEM Microscopy of RGO_20C HP and GO: a) interface  between GO (left) and RGO (right) X50, b) EDS Mapping of oxygen  between interface GO-RGO c) RGO expansion to X1000 and d)  Exfoliation and porous surface of RGO X1000.
Fig. 5. FTIR for RGO_20C HP sample with glucose oxidase enzyme

Referencias

Documento similar

Hydrogenated amorphous silicon is presented as a suitable material for application in solar cells and Hot-Wire Chemical Vapour Deposition is introduced as a viable technique for

Improve this using laser guide star – Sodium or Rayleigh laser. 90 km

We study the optical properties of double-layer graphene for linearly polarized evanescent modes and discuss the in-phase and out-of-phase plasmon modes for both, longitudinal

The polarized emission of the signal state is studied, as a function of the angle, θ P , of the linear polarization of the pump laser, for phase-matching conditions set for the 2D

(a) Angular velocity as a function of the applied laser power and power density for a bare upconverting NaYF 4 :Er 3+ ,Yb 3+ microspinner (black line and hexagons) and for a

• Chapter 2: I review basic concepts of atom chips from laser cooling to the conden- sation process, including wire structures for magnetic trapping and properties of

A histological evaluation of the surgical margins from human oral fibrous-epithelial lesions excised with CO2 laser, Diode laser, Er:YAG laser, Nd:YAG laser, electrosurgical

The determination of taurine based on ECL was investigated using different electrochemical platforms: bare screen-printed graphene (SPGrE) or gold (SPAuE) electrodes and ZnO NWs