• No se han encontrado resultados

LUMINARIAS SOLARES/EÓLICAS URBANAS SOLAR/WIND URBAN LIGHTING SERIES. COMPONENTES DE LAS LUMINARIAS COMPONENTS

N/A
N/A
Protected

Academic year: 2021

Share "LUMINARIAS SOLARES/EÓLICAS URBANAS SOLAR/WIND URBAN LIGHTING SERIES. COMPONENTES DE LAS LUMINARIAS COMPONENTS"

Copied!
5
0
0

Texto completo

(1)

1.Micro-computer and intelligence controller of Solar panel converts solar energy into electric energy. No need to trench and to pull wire. It is easy to install, energy saving and environment-friendly.

2.Micro-computer and intelligence controller is consisted of special integrated discharging, can adjust automatically charging current and protection function of output short circuit protection and reverse connection of polarity. This

4.Time controller can tack automatically, and can adjust opening time according to the shining time of different seasons. Besides, the lights will be turned off automatically during the night by intelligence energy saving

XIANDAI LIGHTING GROUP

LUMINARIAS

SOLARES/EÓLICAS

URBANAS

SOLAR/WIND URBAN

LIGHTING SERIES

1. Micro-ordenador de panel solar y controlador inteligente convierte la energía solar o eólica en energía eléctrica. No hay necesidad de abrir zanjas o instalar cables. Son fáciles de instalar, ahorrando energía y favorable al medio ambiente.

2.Micro-ordenador y controlador inteligente compuesto de circuitos integrados especiales con alta eficiencia de conversión. Evita a su vez el exceso de carga y descarga, ajusta automáticamente la corriente de carga y la función de protección de cortocircuito de salida al mismo tiempo que protege contra una conexión de polaridad inversa. Esto amplía enormemente el tiempo de vida de la batería de almacenamiento. Son seguras y fáciles de instalar.

3.Libres de mantenimiento, Alta eficiencia,

almacenamiento de energía estable y duradero, durables y fuertes.

4.El temporizador puede ajustar de forma automática el tiempo de encendido de las luminarias de acuerdo con el tiempo de la luz solar durante las diferentes estaciones. Además, las luces se apagan de forma automática durante el día a un ahorro de energía de control inteligente, la cual se extiende el tiempo de iluminación. 1. Solar panel's micro-computer and intelligent controller converts solar and wind energy into electric energy. No need to trench or to put up wires. It is easy to install, energy saving and environment-friendly.

2.Micro-computer and intelligence controller is consisted of special integrated circuits with high converting efficiency. It can prevent over-charging and over discharging, it can automatically adjust the charging current and protection function of output short circuit protection and reverse connection of polarity. This greatly extends life time of storage battery. It is safe and easy to install.

3.Maintenance-free, high efficiency, and strong storage, durable and strong.

4.Time controller can tack automatically, and can adjust opening time according to the sunlight time of different seasons. Besides, lights turn off automatically during the day by an intelligent energy saving control, which extends the lighting time.

Aerogenerador Panel Solar Fotovoltaico Wind Turbine Solar Panel

Controlador Híbrido Inversor Tipo I Hybrid Controller Type I Inverter

Controlador Tipo 2 Inversor Tipo I Type 2 Controller Type II Inverter

Baterías Batteries

Controlador Tipo I Caja Sellada para Baterías Type I Controller Sealed Battery Box

CARACTERISTICAS DE LAS LUMINARIAS SOLARES/EÓLICAS URBANAS

SOLAR/WIND URBAN LIGHTING SERIES FEATURES

COMPONENTES DE LAS LUMINARIAS SOLARES/EÓLICAS URBANAS

SOLAR/WIND URBAN LIGHTING SERIES COMPONENTS

(2)

components with high conversion rate

than 2,200 hours treatment.

LS-EOS-005 ● Altura de la lámpara sobre el suelo: 8-10 m

● Fuente de luz: LED de alta potencia de 60-85W equivalentes a bombillas SAP 150-250W

● Panel Solar Fotovoltaico: Componentes solares monocristalinos o policristalinos de silicio con alta tasa de conversión: 150-220W

● Fuente eólica: Aerogenerador de alta tecnología de 300W

● Acumulador: Batería selladas libres de mantenimiento: 180-240Ah

● Sistema de control: Control inteligente por microordenador

● Tiempo de iluminación: 10-12 horas

● Área de aplicación: aquellas regiones donde el tiempo de luz solar al año es de más de 2.200 horas

● Temperatura ambiente: -20˚C a 50ºC

● Poste: Acero de alta calidad Q235, superficie galvanizada con tratamiento de pulverización estática "Hot Dipping"

● Lamp height above ground :8-10m

● Light source: high power 60-85W LED equivalent to 150-250W HPS bulbs

● Solar panel: mono-crystalline or polycrystalline silicon solar components with high conversion rate: 150-220W

● Wind power source: 300W high-tech wind turbine

● Storage batteries: maintenance-free sealed batteries: 180-240Ah

● Control system: micro-computer intelligent control

● Illumination time :10-12 hours

● Application Area: those regions where the annual sunshine time is more than 2,200 hours

● Recommended Working Temperature: -20˚C to 50˚C

● Pole: high-quality Q235 steel made, hot dipping treated galvanized surface

LUMINARIAS SOLARES/

EÓLICAS URBANAS

SOLAR/WIND URBAN

LIGHTING SERIES

LS-EOS-003 LS-EOS-004 LS-EOS-002

(3)

SISTEMA

AEROGENERADOR

WIND TURBINE SYSTEM

FICHA TÉCNICA

TECHNICAL DATA

!!!!!

LS-AERO300

LS-AERO300 GENERADOR

GENERATOR NdFeB (Permanent magnet)

POTENCIA RATED POWER 300 W TENSIÓN RATED VOLTAGE 12/24 V CORRIENTE RATED CURRENT 25/12.5 A NUMERO DE ASPAS BLADE QTY. 3

DIAMETRO DEL ROTOR

ROTOR DIAMETERR 1.55m

MATERIAL DE LAS ASPAS

BLADE MATERIAL Nylon

VELOCIDAD DE VIENTO DE ARRANQUE START-UP WIND SPEED

2.5 m/s

VELOCIDAD DE VIENTO DE CORTE INICIAL CUT-IN WIND SPEED

3.5 m/s

VELOCIDAD DE VIENTO NOMINAL

RATED WIND SPEED 12 m/s

VELOCIDAD DE VIENTO SEGURA

SECURITY WIND SPEED 45 m/s

TRATAMIENTO DE SUPERFICIE SURFACE TREATMENT

Pintura y Electroforesis Electrophoresis processing and painting

TIPO DE BUJE

SLIP RING TYPE Sealed and water proof Sellado impermeable

PESO DEL AEROGENERADOR

GENERATOR WEIGHT 22 kg

TIEMPO DE VIDA UTIL

(4)

SISTEMA AEROGENERADOR

WIND TURBINE SYSTEM

CURVA DE POTENCIA

SISTEMA EÓLICO AUTONOMO

POWER CURVE

OFF-GRID WIND SYSTEM

NIVEL DE RUIDO

NOISE LEVEL

!

(5)

conversion rate

LUMINARIAS SOLARES URBANAS

SOLAR URBAN LIGHTING SERIES

● Altura de la lámpara sobre el suelo: 6-8m

● Fuente de luz: LED de alta potencia de 30-60W equivalentes a bombillas SAP 75-150W

● Panel Solar Fotovoltaico: Componentes solares monocristalinos o policristalinos de silicio con alta tasa de conversión: 90-150W

● Acumulador: Batería selladas libres de mantenimiento: 100-180Ah

● Sistema de control: Control inteligente por microordenador

● Tiempo de iluminación: 10-12 horas

● Área de aplicación: aquellas regiones donde el tiempo de luz solar al año es de más de 2.200 horas

● Temperatura ambiente: -20˚C a 50ºC

● Poste: Acero de alta calidad Q235, superficie galvanizada con tratamiento de pulverización estática "Hot Dipping"

● Lamp height above ground : 6-8m

● Light source: high power 30-60W LED equivalent to 75-150W HPS bulbs

● Solar panel: mono-crystalline or polycrystalline silicon solar components with high conversion rate: 90-150W

● Storage batteries: maintenance-free sealed batteries: 100-180Ah

● Control system: micro-computer intelligent control

● Illumination time :10-12 hours

● Application Area: those regions where the annual sunshine time is more than 2,200 hours

● Recommended Working Temperature: -20˚C to 50˚C

● Pole: high-quality Q235 steel made, hot dipping treated galvanized surface

LS-S005 LS-S004

LS-S003 LS-S002

Referencias

Documento similar

Este tipo de turbinas constan de dos o más álabes, que, desde una vista en planta, se asemejan a una “S”. Debido su geometría curva, los álabes o palas experimentan

Estimación de la energía generada por los sistemas fotovoltaicos Para la viabilidad del proyecto, será imprescindible, cumplir condicion de rentabilidad, donde tendremos

El principal objeto de este trabajo será el diseño, cálculo y posterior verificación de una instalación solar fotovoltaica en la cubierta de una nave industrial ya existente, con 1200

In the construction sector, the integration of photovoltaic systems, better known as BIPV (Building Integrated Photovoltaics), has numerous advantages since, by generating

The best project time is 20 years The area actual daily demand is 668.5kW,In order to ensure the demand(120%×668.5kw=802.2kw),802.2kw Is our conversion energy number of panels are

Figura 15. Variación de la temperatura del LHS Figura 16. Fracción de líquido de PCM en el LHS durante el proceso de carga. durante el proceso de carga. En cuanto

Debido a estos datos, la implementación de instalaciones solares fotovoltaicas en viviendas para la obtención de energía limpia cobra una gran importancia, y puede hacer

Siguiendo esta estela, el proyecto ACCUSOL modela un sistema de almacenamiento de energ´ıa t´ ermica para abordar la transferencia de calor adecuada entre colectores solares,