• No se han encontrado resultados

Rock mechanics as a significant supplement for cross-section balancing (an example from the Pavlov Hills, Outer Western Carpathians, Czech Republic)

N/A
N/A
Protected

Academic year: 2020

Share "Rock mechanics as a significant supplement for cross-section balancing (an example from the Pavlov Hills, Outer Western Carpathians, Czech Republic)"

Copied!
5
0
0

Texto completo

Loading

Figure

Figure 1. Ruptured rock samples after laboratory tests: (a)  uncon-fined compression, (b) Brazilian, (c) Brazilian, cross-section.
Figure 2. Simplified structural map of the Pavlov Hills.
Figure 4. Balanced cross-section 3-4 through Stolova Hora Mountain with seismic section (290/87).

Referencias

Documento similar

This section aims to characterise the SR-CFST cross-section temper- ature field in a simple but practical way by obtaining an equivalent temperature for each part of the

Therefore, most likely, a measurement of the ‘inclusive’ t ¯t + 1-jet cross section would not lead to any significant improve- ment compared to the mass measurements already

Resulta algo frecuente en la fijación de objetivos de planificación y de polí- tica económica, comparar un conjunto heterogéneo de países en un momento dado del tiempo y observar

The observed data sample was used to calculate upper limits on the HSCP production cross section for each considered model and mass point.. The cross section upper limits at 95% CL

upper limit on the scalar leptoquark pair production cross section multiplied by  2 as a function of the LQ mass, together with the NLO theoretical cross section curve.. The

Figure 1 Schematic representation of additively manufactured crystalliser (AMC) designed and used for this work for the heat exchange modelling. A) Cross-section of the

Figure 5.25: (Lower panel) Vibrationally resolved cross section for the three first vibrational levels of the 1σ −1 photoionization of CO as a function of the photon energy..

Structural as well as morphological information from the surface and interface has been obtained by transmission electron microscopy (TEM) cross section images, and