TítuloTime averaged shallow water model: asymptotic derivation and numerical validation
Texto completo
Figure
Documento similar
The stellar evolution model of a red giant with 1.7 M without planet engulfment and with a time-averaged rotation velocity during the main sequence equal to 100 km s −1 shows
A comparison between the averaged experimental data obtained with the predicted results from numerical simulation is done for the validation of the model. In table 2, data from
The atrium has been equipped with temperature, pressure and velocity sensors, in order to study the thermal and fluid fields induced by the fire. Up to sixty one sensors have
Special emphasis is made on the validation of the numerical model with results taken from the literature, the study of the effects of relevant parameters, and
To measure the values for air velocity within the cooling tower, water mass flow, thickness of the water film, and the size of droplets, the equipment used is a
A comparison of the experimental and numerical results for air velocity field, water film thickness and the flow conditions that cause the detachment of droplets
The validation of the temperature drop and cooling efficiency of the cooling pad numerical model is the main objective of this paper, and, in order to get this
The validation of the temperature drop and cooling efficiency of the cooling pad numerical model is the main objective of this paper, and, in order to get this