• No se han encontrado resultados

Georgia-Pacific Soap Dispenser Specification Sheet

N/A
N/A
Protected

Academic year: 2022

Share "Georgia-Pacific Soap Dispenser Specification Sheet"

Copied!
5
0
0

Texto completo

(1)

Georgia-Pacific Soap Dispenser Specification Sheet

5.68" 5.25"

10.75"

13.38"

11.50"

44" MAXIMUM FROM FLOOR 8"

6"

Model No. 53052, 53053

FRONT VIEW SIDE VIEW SIDE VIEW - COVER OPEN

DISPENSER - BACK VIEW BRACKET - BACK VIEW

INSTALLATION

Install dispenser using bracket provided.

Note: Mounting should comply with ADA Guidelines.

Compliance is the responsibility of the installer.

Installation with bracket and screws

1. Position bracket and mark holes using the bracket as a template.

2. Drill holes and attach bracket using appropriate anchors and screws.

3. Align dispenser on bracket and gently push downward until it clicks.

4. To remove, press dispenser release tab while lifting the dispenser upward.

Installation with bracket and tape 1. Clean bracket and mounting surface with alcohol pad.

2. Attach tape to bracket and position bracket on wall.

3. Press bracket firmly to wall for 30 seconds.

Caution - Wait 24 hours before attaching dispenser.

The installation description and illustration herein are to serve as a guide. Georgia-Pacific reserves the right and does from time to time make changes and improvements in design, dimension, and subsequent installations. Georgia-Pacific does not take responsibility for any damage, injury to persons or property or any other incidental or consequential losses due to these installation instructions.

SPECIFICATIONS

This Georgia-Pacific soap dispenser only dispenses Pacific Garden® 1200 mL product refills. The dispenser features two adjustable portion control settings that dispense approximately 0.4 mL or 0.7 mL per activation. The dispenser also allows the use of either a push button or key lock. The dispenser is constructed of high strength, low maintenance polymer materials.

Overall Dimensions Weight

Dispenser: 5.68" W x 10.75" H x 5.25" D Dispenser: 1.4 lbs (0.64 kg)

Pacific Garden is a trademark of Georgia-Pacific Consumer Products LP. © 2009 Georgia-Pacific Consumer Products LP. All rights reserved. GP5077.0902

Need Assistance? Contact Georgia-Pacific at:

1-866-HELLO GP (1-866-435-5647) www.gppro.com

COUNTERTOP

DISPENSER RELEASE TAB

TAPE TAPE

SCREW MOUNTING

HOLES

(2)

B. Dispenser Lock Installation

C. Installation Instructions

Install dispenser using mounting bracket provided.

Note: Mounting should comply with ADA Guidelines.

Compliance is the responsibility of the installer.

Georgia-Pacific Soap Dispenser Operating and Installation Instructions

D. Portion Control Adjustment A. Package Contents

• Dispenser • Push button lock insert

• Mounting bracket • Key lock insert

• (2) Adhesive tape • Key

• Alcohol pad

KEY LOCK

OPTION PUSH BUTTON LOCK OPTION KEY

1. Choose lock option.

2. Insert lock into opening in top of cover.

DISPENSER - BACK VIEW MOUNTING TAPE LOCATION - BACK VIEW SCREW

MOUNTING HOLES

DISPENSER RELEASE TAB

44" MAXIMUM FROM FLOOR 8"

6"

COUNTERTOP

TAPE TAPE

Installation with bracket and screws

1. Position bracket and mark holes using bracket as a template.

2. Drill holes and attach bracket using appropriate anchors and screws.

3. Align dispenser on bracket and gently push downward until it clicks.

4. To remove, press dispenser release tab while lifting the dispenser upward.

. Installation with bracket and tape

1. Clean bracket and mounting surface with alcohol pad.

2. Attach tape to bracket and position bracket on wall.

3. Press bracket firmly to wall for 30 seconds.

Caution - Wait 24 hours before attaching the dispenser.

E. Refill Instructions

0.7 mL PORTION 0.4 mL

PORTION

INSTALL

REMOVE

CLICK 1

2

3

1 1

2

Pacific Garden is a trademark of Georgia-Pacific Consumer Products LP.

© 2009 Georgia-Pacific Consumer Products LP. All rights reserved. GP5074.0902

Use only with

Pacific Garden ® product refills.

Need Assistance?

Contact Georgia-Pacific at:

1-866-HELLO GP (1-866-435-5647) www.gppro.com

ENGLISH

(3)

A. Contenu du paquet

• Distributeur • Barillet de serrure à bouton poussoir • Support de montage • Barillet de serrure à clé

• Ruban adhésif (2) • Clé • Tampon imbibé d’alcool

B. Pose du verrou du distributeur 1. Choisir l’option de verrouillage.

2. Insérer le verrou dans la fente du couvercle.

C. Directives de pose

Poser le distributeur à l’aide du support de montage fourni.

Nota : Exécuter le montage conformément à la réglementation de l’A. D. A. C’est à l’installateur qu’il incombe de veiller au respect de cette réglementation.

Pose à l’aide du support et de vis

1. Positionner le support et marquer l’emplacement des trous en se servant du support comme d’un gabarit.

2. Percer les trous et fixer le support à l’aide des attaches et des vis adéquates.

3. Aligner le distributeur sur le support et appuyer délicatement sur le distributeur jusqu’à ce qu’il s’enclenche.

4. Pour déposer, appuyer sur la languette de libération du distributeur tout en relevant le distributeur.

Pose à l’aide du support et de ruban adhésif

1. Nettoyer le support et la surface de montage avec un tampon imbibé d’alcool.

2. Fixer le ruban adhésif au support et positionner le support sur le mur.

3. Appliquer le support fermement contre le mur pendant 30 secondes.

Attention – Attendre 24 heures avant de fixer le distributeur.

Mode de fonctionnement et directives de pose du distributeur de savon Georgia-Pacific

D. Réglage des doses

E. Directives de rechargement

DISTRIBUTEUR (VUE ARRIÈRE)

COMPTOIR À 111,7 cm MAXIMUM DU PLANCHER

LANGUETTE DE LIBÉRATION DU DISTRIBUTEUR

RUBAN

ADHÉSIF RUBAN

ADHÉSIF TROUS DE

MONTAGE DES VIS

15,2 cm 20,3 cm

EMPLACEMENT DE L’ADHÉSIF DE MONTAGE (VUE ARRIÈRE)

ENCLENCHER 1

2

3

1 1

2

Pacific Garden est une marque de commerce de Georgia-Pacific Consumer Products LP.

© 2009 Georgia-Pacific Consumer Products LP. Tous droits réservés. GP5074.0902

N’utiliser qu’avec des recharges Pacific Garden.

MD

Pour tout besoin d’assistance, s’adresser à Georgia-Pacific au :

1-866-HELLO GP (1-866-435-5647) www.gppro.com

FRANÇAIS

OPTION DE VERROUILLAGE

PAR CLÉ

OPTION DE VERROUILLAGE

PAR BOUTON POUSSOIR CLÉ

DOSE DE 0,7 ml DOSE DE

0,4 ml

POSER

DÉPOSER

(4)

Refill Loading Instructions

U.S. Patent No. D579,250 and other patents pending. GP5073.0902 DATE:

SKU:

CLICK Install / Poser / Instalar

Remove / Déposer / Retirar

Die Cut Label

Overall Label Dimensions: 3.25" X 4.00"

Printed 1 Color: Black

White Stock With Protective Matt Varnish or Overlaminate

2

3

1 2

1 1

Use only Pacific Garden®

product refills.

N’utiliser que des recharges Pacific GardenMD. Sólo use productos Pacific Garden® para rellenar.

Need Assistance? Contact Georgia-Pacific at:

Pour tout besoin d’assistance, s’adresser à Georgia-Pacific au :

¿Necesita ayuda? Comuníquese con Georgia-Pacific al:

1-866-HELLO GP (1-866-435-5647) www.gppro.com

(5)

A. Contenido de la caja

• Jabonera • Inserto de cerradura con botón

• Soporte de pared • Inserto de cerradura con llave • (2) Cintas adhesivas • Llave

• Almohadilla empapada en alcohol B. Instalación de la cerradura

en la jabonera

1. Elija el tipo de cerradura.

2. Introduzca la cerradura en la abertura en la parte superior de la tapa.

C. Instrucciones de instalación

Instale la jabonera con el soporte de pared que se incluye.

Nota : La instalación debe cumplir con los requisitos de la ley de protección a los deshabilitados (ADA). El cumplimiento con esta ley es responsabilidad del instalador.

Instalación con soporte y tornillos

1. Coloque el soporte y, usando el soporte como plantilla, marque la posición de los orificios.

2. Taladre los agujeros e instale el soporte con los tornillos y los anclajes apropiados.

3. Coloque la jabonera alineada en el soporte y empújela con cuidado hacia abajo hasta que entre a presión y se escuche un “clic”.

4. Para retirar la jabonera, oprima la lengüeta para soltar mientras empuja la jabonera hacia arriba.

Instalación con soporte y cinta adhesiva

1. Con la almohadilla empapada en alcohol, limpie el soporte y la superficie donde lo vaya a instalar.

2. Pegue la cinta adhesiva al soporte y coloque el soporte en la pared.

3. Oprima el soporte con firmeza contra la pared durante 30 segundos.

Precaución - Espere 24 horas antes de colocar la jabonera.

Instrucciones de uso y de instalación de la jabonera Georgia-Pacific

D. Ajuste de control de surtido

E. Instrucciones para rellenar la jabonera

JABONERA (VISTA POSTERIOR)

SUPERFICIE DEL LAVABO 44" COMO MÁXIMO DESDE EL PISO LENGÜETA

PARA SOLTAR LA JABONERA

ORIFICIOS PARA TORNILLOS DE MONTAJE

6"

8"

LUGAR PARA LA CINTA DE MONTAJE (VISTA POSTERIOR)

CINTA

ADHESIVA CINTA

ADHESIVA

1 CLIC

2

3

1 1

2

Pacific Garden es una marca registrada de Georgia-Pacific Consumer Products LP.

© 2009 Georgia-Pacific Consumer Products LP. Todos los derechos reservados. GP5074.0902

Sólo use productos Pacific Garden® para rellenar.

¿Necesita ayuda?

Comuníquese con Georgia-Pacific al:

1-866-HELLO GP (1-866-435-5647) www.gppro.com

ESPAÑOL

OPCIÓN DE CERRADURA CON LLAVE

OPCIÓN DE CERRADURA CON BOTÓN LLAVE

SURTIDO

DE 0.4 ml SURTIDO

DE 0.7 ml

INSTALAR

RETIRAR

Referencias

Documento similar

PIs using ThumbRule as lag method and ARIMA as prediction method in the Mexico dataset.. A.27 a)DSS, SCORE and b) CWC of the normal and adjusted PIs using ThumbRule as lag method

A characterization of frames and Riesz bases for left translations on nilpotent Lie groups whose irreducible representations are square integrable modulo the center (which include

III we study the location of maximum transmission of an isolated aperture in a symmetric dielectric configuration, and the differences between empty circular apertures and annular

In the context of a long waterfall phase, during the first stage of the waterfall when the field dynamics is still governed by the slope of the potential in the direction of the

This study aimed to: analyze the differences in surface roughness and shear bond strength (SBS) produced by different femtosecond laser settings and establish a protocol

Although the cut-off dependence of the HEE In section 8.1 we have argued that for θ ≤ 0, in order to extract the structure of terms for general higher-curvature gravities, it suffices

Abstract: We study the first-order in α 0 corrections to non-extremal 4-dimensional dy- onic Reissner-Nordstr¨ om (RN) black holes with equal electric and magnetic charges in

As a consequence, combining this result with known frame theory, we can recover in a simple way all previous Bracket characterizations of Riesz and frame sequences generated by a