Strain monitoring on a composite aircraft cabin with fiber optic sensors

We present a novel technique to deal with a new and interesting problem, which can be stated as follows: How many different types of periodic movements are in a specific scene? Is

The proposed architecture consists of a RFID tag printed on a flexible substrate for the monitoring of four different gases by means of chemical sensors with optical response.. The

Fiber Bragg Gratings, FBG, are very appropriate strain and temperature sensors for structural health monitoring of satellite structures. They can be embedded in composite structures

Using air as a work fluid, a uniformed pressure was wielded inside the sensor body producing a bending on the central part of the membrane, where the sensing part is located

A more complete version of the principles for fiber-optic sensors is described in Ref. This formula can be applied to the ideal single-mode fiber with no birefringence. The Verdet

Many sensors in the market have analog outputs. Because of this, the interfaces library must include a way of dealing with these sensors. All the previous modules deal with

Figure 4B,C are images of the topography and profile, respectively, of the grating taken in shear force mode with an AFM tip mounted on a QTF fiber probe in buffer solution using

This paper describes the development of a new gateway consisting of an EIB/KNX input module to connect optical fiber sensors directly to the bus.. 2.- Optical