Carbon Nanotubes in Portland cement concrete: Influence of dispersion on mechanical properties and water absorption

Physical (mass loss, ultrasonic pulse velocity and capillary water absorption coefficient) and mechanical (compressive strength) properties were studied after the mortars were

Effect of freeze-thaw cycles on the mechanical behavior of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials.. Shima Pilehvar a,b

To this end, it is of paramount importance to carefully design the concrete mix (i.e. cement and aggregate types, cement/water and cement/aggregate ratios, use of

In order to obtain SSS-FA mixes appropriate for use as cement substitutes in the manufacture of SCC, an initial study of the flexural and compressive strength of pastes

Through this manuscript was presented the behaviour of different compositions of metal- lic glasses as a response to an additional variable, namely pressure for the analysis

polymer, quenching the possible positive influence of AC on the membrane properties.  Modification of the polysulfone surface by coating with active carbon layer

We compare the mechanical properties of fibers made of polymers and of composites with pristine single-walled carbon nanotubes (SWNTs), mechanically interlocked

Abstract: The present work investigates the effect of the amount of carbon black on curing and mechanical properties such as tensile strength, elongation at