• No se han encontrado resultados

Preliminary results of feasibility of self-calibration of silicon pn photodiodes at room temperature using temperature sensors

N/A
N/A
Protected

Academic year: 2020

Share "Preliminary results of feasibility of self-calibration of silicon pn photodiodes at room temperature using temperature sensors"

Copied!
8
0
0

Texto completo

Loading

Referencias

Documento similar

The validation of the temperature drop and cooling efficiency of the cooling pad numerical model is the main objective of this paper, and, in order to get this

In this new context, this work presents a system- atic study of the profitability limits of a self-consumption PV installation under different conditions of installed peak

To sum up, by means of a simple method, in a single step at room temperature based on the high insolubility in the reaction medium of the PCs 1 and 2, we can control the

En concreto, los principales objetivos de investigación de la presente tesis se pueden resumir de la siguiente manera: (1) analizar y determinar cuáles son los valores

pastoris has the ability to grow at different acceptable specific growth rates (µ) depending on the temperature of the medium (from 15ºC to 30ºC), lowering the

(110)-(1x1) surface at room temperature, as we are seeing along this thesis. The scan profile of figure 4.2.3.2 c) shows triangular molecules which present borders of

Lacking a detailed theory for non-equilibrium polariton condensates, we test the validity of both atomic theories comparing the behavior of the temperature dependence

In this paper, ring oscillators are employed as temperature transducers (Fig.1). This type of circuits can be easily implemented using few logic cells. The advantages of this