Upper critical fields in a FeSeO 5TeO 5 superconducting single crystal

normal incidence), substrate structure (i.e. single-crystal), artificial in- terfaces (including in-plane, perpendicular, and exchange-biased anisotropy systems), or like

The fluctuations of the complex amplitude, measured for a given spatial frequency as a function of wavelength (top panel), can be related to the different values of the corresponding

In this case, the measurement is independent of the initial demagnetised state (An experiment with a field applied along only one axis of a crystal yields no useful information

However, the sulfurization temperature is the parameter that regulates the formation of an orthorrombic single phase SnS thin film with the optimum properties to be used

We made magnetization hysteresis loops M(H ) at constant temperature below and above T c with a SQUID magnetometer (MPMS) using single needles aligned parallel to the applied

The crystalline quality of these powders is very low in comparison with single crystals, and consequently their optical characterization involves all kinds of crystal and grain

X, Y, and Z-components of the surface displacement and traction fields for loads with magnitudes of 15%, 10% and 5% of the substrate Young ’s modulus, aligned with the X

influence of these parameters on the size and distribution of Te inclusions, deep defects, optical and electrical properties of CdZnTe detectors. In the fourth chapter, the effect