• No se han encontrado resultados

DEGRADATION OF Al4C3 IN Al Mg Si/SiCP COMPOSITES EXPOSED TO MOIST ENVIRONMENTS

N/A
N/A
Protected

Academic year: 2020

Share "DEGRADATION OF Al4C3 IN Al Mg Si/SiCP COMPOSITES EXPOSED TO MOIST ENVIRONMENTS"

Copied!
9
0
0

Texto completo

Loading

Figure

Figure 1. Scanning electron photomicrograph of the M/C interface taken 20 days after the  infiltration trials of a specimen processed at 1100ºC for 60 min
Figure 3. X-ray diffraction pattern of the powder formed in the reaction zone at the  metal/composite interface (4 months after the infiltration trials)
Figure 4. Scanning electron photomicrograph taken 17 months after the infiltration trials in the  specimen processed at 1100ºC for 60 min
Figure 6. Scanning electron photomicrograph showing the metal/composite interface of  composite electrochemically etched

Referencias

Documento similar

HIF-1, hypoxia inducible factor-1; IKKB, inhibitor of nuclear factor kappa-B kinase subunit beta; JNK1, c-Jun N-terminal kinase; LC3, microtubule-associated protein light chain 3;

Vaccines may help to prevent the development of addiction, initiate drug abstinence in those already addicted to drugs, or prevent drug use relapse by reducing the

using plates of the produced alumina and alumina/zirconia composites, and plates of.. It should be noted that zirconia was considered in this study because of its

In Figure 2 we show the results of the functionalized graphene as reinforcements for UHMWPE-based composites. After running-in period, friction coefficient for the

Chapter 4: Synthesis of functional molecules@MOF composites ... Incorporation of functional molecules into the MOFs ... Post synthetic modification of the MOFs by

No obstante, como esta enfermedad afecta a cada persona de manera diferente, no todas las opciones de cuidado y tratamiento pueden ser apropiadas para cada individuo.. La forma

In recycled PLA obtained from slightly degraded PLA, the addition of fibroin obtained by acid hydrolysis and high molecular weight chitosan led to some degradation of the polymer,

For composites modified with one interlayered veil, an increase in flexural strength of 19.7% and 24.6% was observed for the composite with PA6 and 25 wt.% TiO 2 modified