• No se han encontrado resultados

Assessment of cuspal deflection and volumetric shrinkage of different bulk fill composites using non contact phase microscopy and micro computed tomography

N/A
N/A
Protected

Academic year: 2020

Share "Assessment of cuspal deflection and volumetric shrinkage of different bulk fill composites using non contact phase microscopy and micro computed tomography"

Copied!
7
0
0

Texto completo

Loading

Figure

Table 1  Materials, filler loading, manufacturers and batch numbers of the materials
Fig. 2  Aluminum  block  positioned  on  stage  in  front  of  cover glass, facing SDPM.
Fig. 6  MicroCT  images  of  volumetric  polymerization  shrinkage for each group.

Referencias

Documento similar

In the preparation of this report, the Venice Commission has relied on the comments of its rapporteurs; its recently adopted Report on Respect for Democracy, Human Rights and the Rule

The draft amendments do not operate any more a distinction between different states of emergency; they repeal articles 120, 121and 122 and make it possible for the President to

Nevertheless, the ratio of corporations using patents of introduction is higher than that obtained from the analysis of the entire patent system as a whole (around 8.5% from 1820

We compare the mechanical properties of fibers made of polymers and of composites with pristine single-walled carbon nanotubes (SWNTs), mechanically interlocked

The magnetic configuration and magnetization reversal process of cylindrical shaped magnets (nanowires and nanodots) have been studied using Magnetic Force

In this thesis, I have made an effort to improve our understanding of the behaviour of the vortex lattice in different materials, with different pinning landscapes and in a large

of the magnetization is generally observed in all the NP chain structures (from a to i), mainly at frontiers. Other interesting features can be observed, as an onion state in the

In order to better understand and make progress in the investigation of the so- called low-temperature universal properties of non-crystalline solids and the phenomena of