• No se han encontrado resultados

Creep and shrinkage of self compacting concrete of medium-strenght

N/A
N/A
Protected

Academic year: 2020

Share "Creep and shrinkage of self compacting concrete of medium-strenght"

Copied!
12
0
0

Texto completo

Loading

Figure

Fig. 2 Concrete in L box after testing.
Fig. 4 Measurement of the strains in a  specimen during creep testing.
Table 2. Details of the creep tests.
Fig. 5 Compressive strength.  Fig. 6 Elasticity modulus.    01234 1 2 3 Strength at 7 days Strength at 28 daysStrength at 91 days3,43,12,43,83,33,44,143,5Tensile strength (MPa) Concrete
+2

Referencias

Documento similar

In such cases, the designer can still use a concrete syntax pattern to automate the generation of a modelling environment, for which he needs to map meta-model elements to

critical pitting potential (E pit ), which is characterized by a sharp and irreversible increase in the current density. In the case of stainless steels, due to their high

This latter objective function is usually used in the field of structural optimisation, although it is interesting to keep others in mind such as the strain energy, because of

- Contextualize your action. Civic learning is part of the practice of the.. same, with which any established educative proposal should have in mind the concrete reality in which

Effect of freeze-thaw cycles on the mechanical behavior of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials.. Shima Pilehvar a,b

For example, it was found that cement paste specimens with a thickness varying between 1 and 3mm showed surface microcracking when subjected to drying, although it was suggested

To this end, it is of paramount importance to carefully design the concrete mix (i.e. cement and aggregate types, cement/water and cement/aggregate ratios, use of

The next steps in this research line may be (1) to analyze the use of coarse RA in a precast-concrete plant considering, in addition to the aspects covered in this paper,