• No se han encontrado resultados

Development and Testing of a Fiber Bragg Grating Strain Sensor for Uniaxial Compression of Rock Specimens

N/A
N/A
Protected

Academic year: 2020

Share "Development and Testing of a Fiber Bragg Grating Strain Sensor for Uniaxial Compression of Rock Specimens"

Copied!
75
0
0

Texto completo

Loading

Referencias

Documento similar

No obstante, como esta enfermedad afecta a cada persona de manera diferente, no todas las opciones de cuidado y tratamiento pueden ser apropiadas para cada individuo.. La forma

• Step 2’: It is the comparison of the main axes of incremental strain predicted by the model on a horizontal section of the ellipsoid against the strain rate tensors measured by

In the preparation of this report, the Venice Commission has relied on the comments of its rapporteurs; its recently adopted Report on Respect for Democracy, Human Rights and the Rule

Since the strain piezoelectric coefficient of the SBT material used as sensor has a value of d 33 = 15pC/N, and the parameters of the charge amplifier were established as T.S = 1·10

The SAW-induced dynamic modulation of the exciton and biexciton peaks was studied for different acoustic powers and discussed in terms of the SAW strain field

Appendix B: Simulation Results: Force vs. Time, Stress vs. Strain Plots .... A) Stress- strain curve of GelMA with different mathacrylation degree of low, medium and high. The high

Our results here also indicate that the orders of integration are higher than 1 but smaller than 2 and thus, the standard approach of taking first differences does not lead to

Apostolopoulos [36] tested under laboratory conditions a steel alloy (S500s, Tempcore), to study the effect of the strain level and the corrosion duration on the number