• No se han encontrado resultados

Detectores monolíticos y sensores compatibles con altos campos magnéticos para tomografía por emisión de positrones

N/A
N/A
Protected

Academic year: 2020

Share "Detectores monolíticos y sensores compatibles con altos campos magnéticos para tomografía por emisión de positrones"

Copied!
234
0
0

Texto completo

Loading

Referencias

Documento similar

vine shoots attained in an open compost pile against that of a discontinuous biodigester 88.. in

In the drain/source mixing mode, however, the generator connected to gate terminal represents the low frequency data signal to be up-converted thanks to a LO pumping component

Then, since L u -homotopy pull-backs form a distinguished collection, according to condition (4) of Definition 1.1, the homotopy fibers of hocolim I π have the same homology type as

La puerta del acompañante y las puertas traseras se pueden bloquear de forma manual en caso de falla de la llave del vehículo con comando remoto o del cierre centralizado → pág..

Podemos inferir a partir de estos resultados que los rendimientos del factor capital son decre- cientes en media,J= 0.61 y que la velocidad de convergencia

8 GND Power Ground GPIO, dry contact signal and 3.3V switch quantity signal detecting / 3.3V switching signal output /ADC, analog acquisition. 9 RX2 RS232 RX 2 RS422 T-/TTL

Charge from the serial pixel is then transferred to the output node on the falling edge of the summing well (SWx) clock signal.. The addition of charge on the output node causes

Using the appropriate control signals, the relative phase of the input clock, CLKIN, and the output clock, CLK0, can be changed in steps of 1/256 of the clock period (see Fig.